We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

GGIPOWY 3-Pack 18AWG DC 5.5mm x 2.1mm Power Splitter Cord

SKU CH-CT4E-7C0V4

Three 18 AWG splitter cables divide one 5.5 mm × 2.1 mm DC input into two outputs for 12 V to 24 V devices

  • TypeMale-to-Female, DC
  • ColorBlack
  • Length< 1"
  • Connector NumberDC
  • Connector DetailDC
  • Terminal GenderMale to Female
  • Three cables let you power two devices from one adapter
  • Nickel-plated copper cores carry up to 10 A per splitter
  • 18 AWG PVC-insulated wire handles 12 V to 24 V input
  • 5 mm × 2.1 mm barrel plugs fit CCTV cameras and LED strips
  • No soldering required — just plug in and go

Three-Pack Splitter for Dual Devices

This GGIPOWY set contains three DC 5.5mm x 2.1mm splitter cables. Each unit converts a single female barrel input into two male outputs, letting one power adapter run two low-voltage devices. The pack suits CCTV cameras, LED strips, routers and similar equipment that share the same barrel size.

Current Handling Under Load

The copper nickel-plated conductors carry up to 10 A on a single branch with a 10 A total load limit. The 18 AWG construction uses a 0.75 mm² core and roughly 5 mm outside diameter, giving greater current capacity than thinner 0.5 mm² alternatives. Voltage adapts automatically across 12 V to 24 V inputs for stable distribution.

Build and Daily Use

Nickel-plated copper cores and PVC insulation provide durable, stable connections. The plug-and-play barrel jacks eliminate soldering and reduce cable clutter when powering paired devices. Buyers needing a different barrel size or more than two outputs per adapter will need a different solution.

Highlights

  • Three cables let you power two devices from one adapter
  • Nickel-plated copper cores carry up to 10 A per splitter
  • 18 AWG PVC-insulated wire handles 12 V to 24 V input
  • 5 mm × 2.1 mm barrel plugs fit CCTV cameras and LED strips
  • No soldering required — just plug in and go

Specifications

BrandGGIPOWY
ModelGGIPOWY-3PACK-5.5x2.1-CCTV
TypeMale-to-Female, DC
ColorBlack
Length< 1"
Connector NumberDC
Connector DetailDC
Terminal GenderMale to Female
SpecificationsDC, 1, feet, 36 volts_of_direct_current, Black 3pcs, 0.19 pounds, GGIPOWY-3PACK-5.5x2.1-CCTV, FJX-C3-98
ShieldingMore Durable and Stable
ConductorCopper Conductor
ConstructionNickel-plated copper conductor, PVC insulation, Pure copper core
FeaturesDC, Male-to-Female, feet, 36 volts_of_direct_current, 1, Black 3pcs, More Durable and Stable

Questions about this item

Will the 18 AWG copper conductors and 5.5 mm × 2.1 mm connectors run warm if I leave two cameras powered all day?

The splitter uses nickel-plated copper cores rated for up to 10 A total load; at typical 12 V or 24 V camera currents the cable stays cool during continuous operation.

My power supply has a single 5.5 mm × 2.1 mm output — is that the only thing I need to connect both devices?

Yes, plug the adapter into the female jack and the two male plugs go straight to your devices; no extra cables or soldering are required.

I still have an older 12 V DVR that uses the same 5.5 mm × 2.1 mm barrel — will it share the adapter reliably with a new camera?

The splitter accepts 12 V to 24 V input and distributes current dynamically, so legacy 12 V gear and newer 24 V devices can run together from one adapter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.