Gemini PDWR45WT 300 W indoor outdoor speaker pair white
A pair of waterproof indoor-outdoor speakers delivering 300 W peak power with universal mounting brackets included
- TypeSubwoofer
- ChannelsSubwoofer Only
- Sold AsSystem
- Speakers ConfigurationSoundbar
- Driver Units6.5"
- Power Rating300 watts
- 300 W peak power drives loud, clear sound indoors or out
- 150 W RMS at 8 ohms sustains clean output for extended listening
- 4 in aluminium cone, 1.75 in midrange and 0.5 in polymer tweeter cover 27 Hz to 120 kHz
- Marine-grade ABS enclosure resists heavy water splashes on boats, decks and poolside
- Horizontal or vertical mounting with included brackets, hardware and speaker cable
Indoor outdoor speaker pair
The Gemini PDWR45WT is a pair of wired two-way speakers rated at 300 watt peak power and 150 watt RMS at 8 ohms. Each cabinet uses a 4 inch aluminum injection cone subwoofer, a 1.75 inch midrange driver and a half inch high compliance polymer tweeter. The ABS enclosures are marine grade waterproof for decks, patios, poolside or boat installations. The set includes two speakers, mounting brackets, hardware and speaker cable.
Build integration and wiring
The speakers present a 4 ohm nominal impedance and connect through quick connect disconnect terminals fed by a capacitor crossover network that separates the two channels. They accept corded electric power and can be mounted horizontally or vertically using the supplied brackets. The wired design means no wireless pairing or network configuration is required, freeing the installer from router placement or signal drop concerns.
Sustained output behaviour
The 150 watt RMS rating indicates the continuous power the pair can handle without thermal compression during long listening sessions. The frequency response extends from 27 Hz to 120 kHz, so bass and high frequency detail remain consistent over time. The polymer tweeter and aluminum cones are built to resist fatigue from repeated high excursion cycles in outdoor conditions.
Highlights
- 300 W peak power drives loud, clear sound indoors or out
- 150 W RMS at 8 ohms sustains clean output for extended listening
- 4 in aluminium cone, 1.75 in midrange and 0.5 in polymer tweeter cover 27 Hz to 120 kHz
- Marine-grade ABS enclosure resists heavy water splashes on boats, decks and poolside
- Horizontal or vertical mounting with included brackets, hardware and speaker cable
Specifications
| Brand | Gemini |
|---|---|
| Series | PDWR45WT, Pyle |
| Model | ARIA926DW |
| Part Number | PDWR45WT |
| Type | Subwoofer |
| Channels | Subwoofer Only |
| Sold As | System |
| Speakers Configuration | Soundbar |
| Driver Units | 6.5" |
| Power Rating | 300 watts |
| Frequency Response | 27Hz - 120kHz |
| Nominal Impedance | 4 Ohms |
| Connectors | Wired |
| Power Supply | Corded Electric |
| Color | Black |
| Features | Speaker, Active, Coaxial, dynamic_driver |
| Dimensions & Weight | 120×120×25mm 4.72*4.72*0.98in |
Questions about this item
How much continuous power can the 4‑inch subwoofer handle before it compresses?
The speakers are rated at 150 watts RMS per channel at 8 ohms, so the 4‑inch subwoofer will stay clean up to that continuous level.
Do the ABS cabinets or the 1/2‑inch polymer tweeter get hot or noisy during all‑day playback?
The passive design has no internal amplifier or fan, so the cabinets stay cool and add no audible noise even after hours of use.
What amplifier or receiver do I need to drive these 8‑ohm speakers?
Any stereo amplifier or receiver with speaker‑level outputs rated for 8‑ohm loads will work; connect the included cable to the quick‑connect terminals.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



