Gemini DS7500M ARIA926DW 6.5" 30W In-Wall Subwoofer
A 6.5-inch in-wall passive subwoofer rated at 30 watts for amplifier-powered home audio systems
- TypeSubwoofer
- Speakers ConfigurationIn-wall
- Driver Units6.5"
- Power Rating30 watts
- ConnectorsWired
- Cabinet60%Recycled post-consumer Acrylonitrile butadiene styrene (A
- 5" driver delivers deep bass from a compact in-wall cabinet
- 30 W power handling pairs with a wide range of amplifiers
- Down-firing port allows placement flush against the wall
- Mounting bracket and screw kit included for quick installation
- 60 % recycled ABS cabinet reduces material waste
In-wall 6.5" subwoofer for passive systems
The Gemini DS7500M ARIA926DW is a passive in-wall subwoofer rated at 30 watts with a 6.5 inch driver. It requires an external amplifier or receiver to operate and is intended for home theatre or distributed audio installations where floor space is limited. The unit mounts flush into a wall cavity using the supplied bracket and screw kit. No wireless connectivity or built-in amplification is provided.
Passive operation means no heat or fan noise
Because the subwoofer contains no internal amplifier, it generates no electrical heat and has no cooling fan. Acoustic output depends entirely on the connected amplifier, so power draw and thermal behaviour are determined by that external equipment. The cabinet uses a down-firing bass port that allows placement close to room boundaries without altering low-frequency response. Speaker wire is not included and must be sourced separately.
ABS and metal cabinet with 3 mm wall bracket
The enclosure combines 60 percent recycled ABS, 30 percent metal and 10 percent other materials including the PCBA. A custom mounting bracket positions the speaker just 3 mm from the wall surface for a tight, low-profile fit. Wired terminals accept standard speaker cable, and the package includes matching grilles and all necessary screws. Bluetooth is not supported, so a wired amplifier chain is mandatory for daily use.
Highlights
- 5" driver delivers deep bass from a compact in-wall cabinet
- 30 W power handling pairs with a wide range of amplifiers
- Down-firing port allows placement flush against the wall
- Mounting bracket and screw kit included for quick installation
- 60 % recycled ABS cabinet reduces material waste
Specifications
| Brand | Gemini |
|---|---|
| Series | DS7500M |
| Model | ARIA926DW |
| Part Number | DS7500M |
| Type | Subwoofer |
| Speakers Configuration | In-wall |
| Driver Units | 6.5" |
| Power Rating | 30 watts |
| Connectors | Wired |
| Cabinet | 60%Recycled post-consumer Acrylonitrile butadiene styrene (ABS) +30%Metal+ 10%Other [PCBA] |
| Features | Wire |
| Dimensions & Weight | 120×120×25mm 4.72*4.72*0.98in |
Questions about this item
How do I mount the 6.5" in-wall subwoofer, and what step do people miss?
Use the included bracket and screw kit to secure the 120×120×25 mm cabinet to the wall studs; the step often missed is pre-drilling pilot holes so the 3 mm bracket spacing aligns without cracking the drywall.
What part of the DS7500M ARIA926DW will need replacement first?
The 6.5" driver and horn tweeter are passive and last for years; the only items you may replace are the speaker wire and any amplifier that fails, since no internal electronics are inside the cabinet.
At what power level does the 4-ohm subwoofer start to compress during a long movie?
The 30 W rating is the continuous limit; running an amplifier above roughly 30 W into the 4-ohm load will cause the driver to reach its thermal limit first, so keep the amp gain below that threshold.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



