GELID SOLUTIONS
GELID SOLUTIONS CA-PWM-03 1-to-4 4pin PWM Fan Power Splitter internal power cable
Splits one PWM header into four fan connectors while drawing power directly from a Molex source
- TypeCable Kits
- ColorBlack
- Length16.54"
- Cable Length1.37 ft.
- Connector Number6
- Connector Detail4 x 4 Pin PWM Header 1 x 4 Pin PWM Connector 1 x 4 Pin Molex
- Connect 4 PWM fans from one CPU header
- 37 ft cable reaches across the case
- Direct PSU power via 4-pin Molex header
- 54 inch total length for tidy routing
- Black sleeving matches dark-themed builds
Connect Four PWM Fans From One Header
This 1-to-4 PWM splitter lets you run four 4-pin fans from a single motherboard header while drawing extra power through a 4-pin Molex connector. It is designed for builders who need more fan connections than their board provides without losing PWM speed control.
Power Delivery And Signal Integrity
The cable routes the PWM signal from the motherboard to all four fan headers so speeds stay synchronised, while the Molex link supplies the current needed for multiple fans. Total length is 16.54 inches, giving enough reach for typical chassis layouts without excess slack.
Simple Installation With Included Connectors
The kit supplies one 4-pin PWM input, four 4-pin PWM outputs and one 4-pin Molex power connector in a black sleeve. No software or adapters are required; buyers who need fan-speed reporting from every individual fan or who want addressable RGB control should look elsewhere.
Highlights
- Connect 4 PWM fans from one CPU header
- 37 ft cable reaches across the case
- Direct PSU power via 4-pin Molex header
- 54 inch total length for tidy routing
- Black sleeving matches dark-themed builds
Specifications
| Brand | GELID Solutions |
|---|---|
| Model | CA-PWM-03 |
| Type | Cable Kits |
| Color | Black |
| Length | 16.54" |
| Cable Length | 1.37 ft. |
| Connector Number | 6 |
| Connector Detail | 4 x 4 Pin PWM Header 1 x 4 Pin PWM Connector 1 x 4 Pin Molex Header |
| Features | Connect 4 PWM fans to your mainboard’s CPU socket with direct power supply from PSU. Use multiple PWM splitter to connect 4 PWM fans and provide additional cooling as before. Power drawn into your CPU cooler is adjusted depending on its temperature. An idle CPU does not generate as much heat, requires less active cooling, and hence slower fan speeds will be sufficient. Further this also reduces the overall ambient noise of your PC and it’s handled automatically with little risk to your PC components. While PWM fan controllers are very common in today's PC industry and available on mo |
| Shipping weight | 0.03 kg |
| Package size | 224 × 84 × 3 mm |
Questions about this item
How do I install the CA-PWM-03 splitter and which connection is often missed?
Plug the single 4-pin PWM connector into the motherboard CPU fan header, attach up to four fans to the four 4-pin PWM headers, then connect the 4-pin Molex header to a PSU Molex lead; the Molex link is the step most builders forget.
What maintenance or replacement will the CA-PWM-03 need over time?
No scheduled maintenance is required; inspect the black 1.37 ft cables and six connectors occasionally for dust or loose pins, and replace the whole splitter only if a header becomes damaged or intermittent.
What limit appears first when running four fans continuously on the CA-PWM-03?
The combined current draw of all four fans must stay within the motherboard PWM header and PSU Molex connector ratings, so total fan amperage is the practical ceiling under sustained load.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115093BTC
In stock
