Gefen
Gefen EXTAUD1000 Audio Extender 1000ft
Extends unbalanced analog audio up to 1000 feet over a single CAT-5e cable with bidirectional speaker and mic support
- Max Extend Distance1000 feet
- ColorWhite
- SpecificationsFrequency Response: 20Hz - 20kHz Input impedance: 1K Ohm Out
- FeaturesExtends any unbalanced analog audio device up to 1000 feet (
- Dimensions0.80" x 1.30" x 3.70"
- Weight1.05
- Extends analog audio up to 1000 feet using one CAT-5e cable
- Bidirectional design carries both speaker and microphone signals over the link
- Flat frequency response from 20 Hz to 20 kHz preserves full-range sound
- Compact sender and receiver units measure just 0.80" x 1.30" x 3.70
- Low 5 W maximum power draw from included 5 V DC supply
Product purpose
The Gefen EXTAUD1000 extends unbalanced analogue audio signals up to 1000 feet using a single shielded CAT-5e cable. It suits installers and AV technicians who need to locate speakers or microphones far from the source equipment. The bidirectional design handles both stereo output and microphone input over the same link. It is not for users who require balanced professional audio connections or digital signal transmission.
Thermals noise and power
The compact sender and receiver units draw a maximum of 5W from the included 5V DC supply and operate without fans, so they add no audible noise to the installation. Passive cooling keeps the enclosures silent in quiet rooms or studio environments. Power consumption remains low even at the full 300 metre extension distance.
Bundled accessories and software
Stereo 3.5mm cables are supplied to connect the source and the output device directly to the extender units. The only link cable required is a standard shielded CAT-5e run, which the installer provides to suit the exact distance. No drivers, configuration utilities or firmware updates are needed for operation.
Highlights
- Extends analog audio up to 1000 feet using one CAT-5e cable
- Bidirectional design carries both speaker and microphone signals over the link
- Flat frequency response from 20 Hz to 20 kHz preserves full-range sound
- Compact sender and receiver units measure just 0.80" x 1.30" x 3.70
- Low 5 W maximum power draw from included 5 V DC supply
Specifications
| Brand | Gefen |
|---|---|
| Model | EXTAUD1000 |
| Part Number | EXTAUD1000 |
| Max Extend Distance | 1000 feet |
| Color | White |
| Specifications | Frequency Response: 20Hz - 20kHz Input impedance: 1K Ohm Output impedance: 0.1 Ohm Audio Connectors: Mini-phone Stereo 3.5mm Link Connector: RJ-45 Shielded Power Supply: 5V DC Power Consumption: 5W (max) |
| Features | Extends any unbalanced analog audio device up to 1000 feet (300 meters) from the source One CAT-5e cable used for extension Bidirectional transmission for speaker and mic |
| Dimensions | 0.80" x 1.30" x 3.70" |
| Weight | 1.05 |
| Shipping weight | 1.36 kg |
| Package size | 277 × 201 × 74 mm |
Questions about this item
How do I connect the sender and receiver units with the CAT-5e cable and 3.5mm plugs?
Plug the sender into your audio source using the supplied stereo cable, connect the receiver to your speakers, then run one shielded CAT-5e cable between the RJ-45 ports on both units up to 1000 feet.
Will the 5V DC power supply or the 3.5mm jacks need replacement after extended use?
The 5V DC supply is the only component likely to need replacement over time; the 3.5mm connectors and RJ-45 ports are passive and rated for the product's lifespan.
At what cable length does signal quality start to degrade on a 1000-foot run?
The extender is specified for 20Hz to 20kHz frequency response across the full 1000-foot distance using CAT-5e, so degradation should not appear within that limit.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



