We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver metal box with DVI, USB, RJ45 ports and front panel buttons

Gefen

Gefen EXT-DVIKVM-LAN-LRX DVI KVM over IP Extender with Local DVI Output

SKU CH-7XS2-XH0YG

Extends DVI, USB, RS-232 and stereo audio 328 ft over CAT5/6 with local DVI output and four USB 2.0 ports

  • Power ConsumptionSender: 10W maximum Receiver: 20W maximum
  • Power SupplySender: 5V DC 2.6A, locking Receiver: 5V DC 4A, locking
  • SpecificationMaximum Pixel Clock: 165 MHz Video Input Connector (Sender):
  • FeatureExtends DVI, USB, RS-232, and stereo analog audio over IP, u
  • Dimensions8.4" x 1.7" x 4.5"
  • Extends DVI, USB, RS-232 and audio over IP using Gigabit LAN
  • Supports resolutions up to 1080p and 1920 x 1200 WUXGA
  • Local DVI output on sender plus four USB 2.0 ports on receiver
  • Three-port Ethernet switch built into receiver for network connectivity
  • Sender and receiver operate up to 328 ft over CAT5/6

Professional DVI KVM Extension

The Gefen EXT-DVIKVM-LAN-LRX extends DVI video, USB 2.0 peripherals, RS-232 control and stereo analog audio over a Gigabit LAN. A sender unit provides a local DVI output for on-site monitoring while the receiver connects up to four USB devices and includes a three-port Ethernet switch. Maximum supported resolutions are 1080p and 1920 x 1200 WUXGA at a 165 MHz pixel clock.

Verify Network And Cabling

Ensure your infrastructure uses CAT5/6 cabling with runs no longer than 328 ft between sender and receiver. The Gigabit switch must support 8k jumbo frames for multipoint matrix operation. Confirm the sender requires a 5V DC 2.6A locking supply and the receiver a 5V DC 4A locking supply. Video sources must output a DVI 29-pin digital-only signal.

Replaces Point-To-Point Extenders

This IP-based system replaces direct CAT5/6 KVM extenders when you need a virtual matrix of up to 65,000 endpoints or shared USB access across multiple receivers. The jump is worth it for installations requiring flexible routing between mixed HDMI, DVI and VGA sources without dedicated cabling per link. It is not suited for buyers needing uncompressed video beyond 1920 x 1200 or fibre-distance transmission.

Highlights

  • Extends DVI, USB, RS-232 and audio over IP using Gigabit LAN
  • Supports resolutions up to 1080p and 1920 x 1200 WUXGA
  • Local DVI output on sender plus four USB 2.0 ports on receiver
  • Three-port Ethernet switch built into receiver for network connectivity
  • Sender and receiver operate up to 328 ft over CAT5/6

Specifications

BrandGefen
ModelEXT-DVIKVM-LAN-LRX
Power ConsumptionSender: 10W maximum
Receiver: 20W maximum
Power SupplySender: 5V DC 2.6A, locking
Receiver: 5V DC 4A, locking
SpecificationMaximum Pixel Clock: 165 MHz
Video Input Connector (Sender): (1) DVI 29-pin, female, digital only
Video Local Output Connector (Sender): (1) DVI 29-pin, female, digital only
Video Output Connector (Receiver): (1) DVI 29-pin, female, digital only
Line Input (Sender): (1) 3.5mm mini-stereo jack
Line Output (Receiver): (1) 3.5mm mini-stereo jack
USB Host Interface (Sender): (1) USB Type B, female
USB Device Connectors (Receiver): (4) USB Type A, female
RS-232 Connector (Sender): 1) DB-9, female
RS-232 Connector (Receiver): (1) DB-9, male
Ethernet connector (Sender): (1) RJ-45, female
Et
FeatureExtends DVI, USB, RS-232, and stereo analog audio over IP, using a Gigabit Local Area Network Any combination of HDMI, DVI, and VGA Senders and Receivers can be used together to create a "Virtual Matrix"
Any combination of HDMI, DVI, and VGA Senders and Receivers can be used together to create a "Virtual Matrix"
Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA)
Supports a local DVI monitor at Sender side
Supports 4 USB devices at Receiver side, with 500mA current capability per port, USB 2.0 data rates up to 480 Mbps, and backward-compatibility with USB 1.1
Any of the
Dimensions8.4" x 1.7" x 4.5"
Shipping weight2.09 kg
Package size343 × 210 × 95 mm

Questions about this item

What cables and power supplies come with the EXT-DVIKVM-LAN-LRX, and which items must be sourced separately?

The unit includes an L-shaped mounting bracket and locking 5 V DC power supplies (2.6 A for the sender, 4 A for the receiver). CAT5/6 network cables, DVI cables, USB peripherals and a Gigabit switch with 8 k jumbo-frame support are not included.

When should I choose the LRX receiver instead of a standard transmitter/receiver pair?

Select the LRX when you need a local DVI monitor at the sender location plus four USB 2.0 ports, RS-232 and stereo audio at the receiver, and the ability to join a virtual matrix of up to 65,000 units over Gigabit Ethernet.

What does the 165 MHz pixel clock mean for the video I see at the receiver?

It supports input and output resolutions up to 1080p Full HD and 1920 x 1200 WUXGA over the IP link.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.