Gefen
Gefen EXT-DVI-142DLN 1:2 Dual Link DVI KVM Switch
Splits one dual-link DVI source to two displays simultaneously up to 3840 x 2400 resolution with auto EQ and HDCP pass-through
- TypeConsumer Electronics
- Split one DVI source across two displays simultaneously
- Dual-link support up to 3840 x 2400 resolution
- Auto EQ corrects signal imperfections automatically
- HDCP pass-through on primary output for protected content
- DDWG standard compliance ensures monitor compatibility
Signal distribution
The Gefen EXT-DVI-142DLN splits one dual-link DVI source to two dual-link DVI outputs for simultaneous display on two screens. It accepts single-link resolutions up to 1920 x 1200 and dual-link up to 3840 x 2400. Auto EQ compensates for signal imperfections. HDCP pass-through is provided on output one.
Sustained operation
The unit draws power from an included 5V DC supply to maintain stable dual-link bandwidth across both outputs during continuous use. Cascading multiple 142 units extends the distribution chain without degrading the amplified signal. Front-panel DVI Link indicators confirm active connections on each port.
DVI interface limits
Dual-link DVI bandwidth caps the maximum resolution at 3840 x 2400, so higher pixel counts cannot be transmitted. Single-link sources are limited to 1920 x 1200 regardless of display capability. The DDWG standard ensures compatibility with compliant monitors, but newer digital interfaces are not supported.
Highlights
- Split one DVI source across two displays simultaneously
- Dual-link support up to 3840 x 2400 resolution
- Auto EQ corrects signal imperfections automatically
- HDCP pass-through on primary output for protected content
- DDWG standard compliance ensures monitor compatibility
Specifications
| Brand | Gefen |
|---|---|
| Type | Consumer Electronics |
| Shipping weight | 1.38 kg |
| Package size | 25 × 25 × 23 mm |
Questions about this item
Does the Gefen EXT-DVI-142DLN generate noticeable heat or fan noise when powered on all day?
The unit has no fan and draws power from an external 5 V DC supply, so it runs silently with minimal warmth during continuous use.
Which cables and power items must I already have to connect a PC and two monitors to this splitter?
You need one dual-link DVI cable from the source to the input, two dual-link DVI cables to the displays, and a nearby mains socket for the included 5 V DC adapter.
Will the EXT-DVI-142DLN pass a 1920 x 1200 single-link signal from an older graphics card to both screens without downscaling?
Yes, the splitter supports single-link resolutions up to 1920 x 1200 and duplicates that signal to both dual-link outputs at native resolution.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



