We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Single spool of metallic silver silk PLA filament on a plastic reel, vacuum-sealed in clear bag with desiccant

Geeetech Silk PLA Filament 1.75 mm 1 kg Silk Silver

SKU CH-JPP6-WD233

1.75 mm silk PLA filament with ±0.02 mm accuracy, metallic silver finish, and vacuum-sealed 2.2 lb spool for glossy decorative prints

  • ColorSilk Silver
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight2.2 pounds
  • Glossy metallic silver finish for decorative prints
  • Anti-warping formula with no bubbles or jamming
  • ±0.02 mm diameter accuracy for consistent extrusion
  • Prints at 180–210 °C with 50–70 °C bed
  • Vacuum-sealed spool with desiccant keeps filament dry

Silk PLA Filament 1.75 mm 1 kg Silk Silver

Geeetech Silk PLA Filament delivers a metallic silver finish with a glossy surface for decorative prints, cosplay props and gift items. The spool contains 2.2 pounds of polylactic acid material wound to a 1.75 mm diameter with a dimensional accuracy of +/- 0.02 mm. It is suited for makers who want eye-catching results without post-processing.

Check printer specifications before ordering

Verify that your 3D printer accepts 1.75 mm filament and can reach a nozzle temperature between 180 and 210 °C (356 to 410 °F). A heated bed capable of 50 to 70 °C (122 to 158 °F) is recommended. Printing speed should be set between 40 and 60 mm/s for best results. The vacuum-sealed packaging with desiccant keeps the filament dry until use.

Behaviour under sustained load

The filament is formulated to resist warping, bubbling, jamming and stringing during long print sessions. Consistent dimensional accuracy helps maintain layer adhesion over extended builds. Stable extrusion at the recommended temperature range reduces the risk of clogs when printing large or complex models continuously.

Highlights

  • Glossy metallic silver finish for decorative prints
  • Anti-warping formula with no bubbles or jamming
  • ±0.02 mm diameter accuracy for consistent extrusion
  • Prints at 180–210 °C with 50–70 °C bed
  • Vacuum-sealed spool with desiccant keeps filament dry

Specifications

BrandGeeetech
Model.
ColorSilk Silver
MaterialPolylactic Acid
Diameter1.75
Weight2.2 pounds

Questions about this item

Does the Silk Silver spool come vacuum-sealed with desiccant, or do I need to buy a dry box separately?

The filament ships in a vacuum-sealed bag that already includes a desiccant pack to keep the material dry.

Is the 1.75 mm diameter with ±0.02 mm accuracy the only option listed for this Silk Silver PLA?

Yes, the product is offered solely as 1.75 mm filament with a dimensional tolerance of ±0.02 mm in a 1 kg spool.

What nozzle and bed temperatures should I set on my printer for the recommended 40–60 mm/s speed range?

Use a nozzle temperature of 180–210 °C and a heated bed of 50–70 °C for the stated print speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.