We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PLA filament spool, 1.75mm diameter, 1kg net weight

Geeetech A-Black PLA Filament 1.75mm Black 1kg (2.2lbs)

SKU CH-WMV7-8GT3J

1.75 mm PLA filament on a tangle-free 1 kg spool with ±0.02 mm accuracy for reliable FDM printing

  • ColorPla Black
  • MaterialPLA
  • Diameter1.75
  • Weight2.2 pounds
  • ±0.02 mm diameter tolerance for consistent extrusion
  • Tangle-free spool winding prevents jams during printing
  • Vacuum-sealed with desiccant for clog-free, bubble-free prints
  • Compatible with most 1.75 mm FDM printers
  • Prints at 185–215 °C nozzle, 25–60 °C bed with low shrinkage

Geeetech A-Black PLA Filament 1.75mm Black 1kg

Geeetech A-Black PLA filament comes on a 1kg spool with a 1.75mm diameter and ±0.02mm tolerance. The black PLA material is vacuum-sealed with desiccant to prevent moisture absorption. It suits makers and hobbyists using most FDM 3D printers that accept standard 1kg spools.

Upgrading from inconsistent or tangled filament

This spool replaces filament that suffers from diameter variation, tangles, or moisture-related clogs. The jump is worth it when you need reliable feeding for functional parts, props, or creative projects without frequent nozzle jams or stringing defects.

Check your printer and storage setup

Verify your FDM printer uses 1.75mm filament and accommodates a 1kg spool. The recommended nozzle temperature range is 185°C to 215°C with a heated bed at 25°C to 60°C. Keep the filament dry and dust-free after opening; an extra sealed bag is included for storage.

Highlights

  • ±0.02 mm diameter tolerance for consistent extrusion
  • Tangle-free spool winding prevents jams during printing
  • Vacuum-sealed with desiccant for clog-free, bubble-free prints
  • Compatible with most 1.75 mm FDM printers
  • Prints at 185–215 °C nozzle, 25–60 °C bed with low shrinkage

Specifications

BrandGeeetech
ModelA-Black
ColorPla Black
MaterialPLA
Diameter1.75
Weight2.2 pounds

Questions about this item

Will the 1.75mm diameter spool fit my printer's filament holder?

The spool weighs 2.2 lbs and matches standard 1kg dimensions, so it fits most FDM printers that accept 1.75mm filament on a regular spool mount.

What nozzle and bed temperatures should I set for the first print?

Heat the nozzle to 185°C - 215°C and the bed to 25°C - 60°C; the filament is vacuum-sealed with desiccant, so dry it first if the seal was broken.

How should I store the filament after opening to avoid brittleness or jams?

Keep it in the extra sealed bag with desiccant, away from moisture and dust; the PLA stays stable at room temperature but absorbs humidity quickly once exposed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.