We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten rectangular metal ballast units in a cardboard case

GE Lighting

GE Lighting GE332-MVPS-N 3-lamp T8 electronic ballast 120-277V case of 10

SKU CH-J7N3-115SH

Electronic programmed-start ballast runs three F32T8 lamps at 120-277 V with .88 ballast factor, <10 % THD and A-rated sound, packed in a case of 10

  • Case of 10 simplifies multi-fixture projects
  • Programmed start extends lamp life for frequent switching
  • Universal 120-277 V input suits varied supplies
  • Low 20-24 dB sound rating keeps spaces quiet
  • Active power-factor correction reduces harmonic distortion

Commercial lighting upgrade

This case of 10 GE Lighting GE332-MVPS-N electronic ballasts is built for facility managers and electricians maintaining linear fluorescent T8 systems in commercial or institutional buildings. Each unit operates on universal 120-277 volt input and uses programmed start technology to reduce electrode wear during frequent switching cycles.

Magnetic ballast replacement

The ballasts replace older magnetic or instant-start electronic models where lamp life and energy draw are concerns. Programmed start operation and anti-striation control make the switch worthwhile in spaces with occupancy sensors or frequent on-off cycles such as corridors, restrooms and classrooms.

Three-lamp capacity and limits

One ballast drives three F32T8 lamps at a normal 0.88 ballast factor with active power factor correction and total harmonic distortion below 10 percent. Sound rating A at 20-24 decibels suits quiet areas, while the 70 degree Celsius maximum case temperature sets the thermal boundary for enclosed fixtures.

Highlights

  • Case of 10 simplifies multi-fixture projects
  • Programmed start extends lamp life for frequent switching
  • Universal 120-277 V input suits varied supplies
  • Low 20-24 dB sound rating keeps spaces quiet
  • Active power-factor correction reduces harmonic distortion

Specifications

BrandGE

Questions about this item

What case temperature rating does the GE332-MVPS-N ballast require for safe mounting?

The ballast is rated for a maximum case temperature of 70 °C (158 °F), so allow enough airflow around the metal enclosure to stay below that limit.

Which wiring step is most often missed when installing a parallel-wired programmed-start ballast?

Connect each of the three F32T8 lamps to its own pair of leads — red to one lamp, blue to the next, yellow to the third — and cap the unused leads; skipping a pair leaves a lamp dark.

How can I tell when the GE332-MVPS-N ballast needs replacement?

If lamps flicker, fail to start, or the ballast hum rises above the normal 20–24 dB A rating, the unit has likely reached end of life and should be swapped.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.