We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

GE Lighting

GE Lighting 96721 GE332-MVPS-L T8 Electronic Fluorescent Ballast 2 Lamp

SKU CH-8P08-CNZMC

Operates two F32T8 lamps at 120-277V with 0.71 ballast factor and under 10% THD

  • Low-watt operation at 0.71 ballast factor saves energy
  • Anti-striation circuitry prevents flicker with energy-saving lamps
  • Rapid start extends lamp life beyond 100000 switching cycles
  • Parallel lamp operation keeps one lamp lit if the other fails
  • Universal 120-277 volt input suits most commercial installations

Application fit

The GE 96721 GE332-MVPS-L is an electronic fluorescent ballast designed to operate two F32T8 lamps. It accepts a 120V-277V input range and delivers a 0.71 ballast factor for low-watt operation. The unit suits commercial or residential fixtures where parallel lamp operation simplifies maintenance. It is not for installations requiring more than two lamps or a different ballast factor.

Electrical behaviour

UltraStart technology provides programmed rapid starting that extends lamp life beyond 100,000 on/off cycles in frequently switched applications. Total harmonic distortion stays below 10% during normal operation. Anti-striation circuitry reduces visible striations when energy-saving lamps are used. The ballast runs two lamps in parallel so one lamp failure does not extinguish the other.

Included value

The package supplies the ballast unit only; no lamps, mounting hardware or wiring connectors are bundled. Parallel lamp operation means a single replacement ballast restores both lamps, reducing parts inventory. Anti-striation circuitry protects lamp performance without extra filters. No software or configuration tools are required or provided.

Highlights

  • Low-watt operation at 0.71 ballast factor saves energy
  • Anti-striation circuitry prevents flicker with energy-saving lamps
  • Rapid start extends lamp life beyond 100000 switching cycles
  • Parallel lamp operation keeps one lamp lit if the other fails
  • Universal 120-277 volt input suits most commercial installations

Specifications

BrandGE

Questions about this item

How do I wire the GE 96721 ballast for parallel lamp operation?

Connect the two F32T8 lamps in parallel to the ballast output leads following the wiring diagram on the case; parallel operation lets one lamp stay lit if the other fails, simplifying maintenance.

What maintenance will the GE 96721 ballast need over its service life?

The ballast itself is solid-state and requires no scheduled maintenance; plan to replace the F32T8 lamps after their rated hours, and the ballast after roughly 100,000 on/off cycles in frequently switched installations.

What thermal limit appears first when the GE 96721 runs continuously at full load?

The ballast is rated for 120 V–277 V input with <10 % THD and .71 ballast factor; sustained operation above the rated voltage range or in an unventilated enclosure will trigger its internal thermal protection first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.