We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular GE Lighting 50 W LED driver unit

GE Lighting

GE Lighting 36535 GED50DCP2P1300S 50 W ballast

SKU CH-35F3-2J036

Constant current LED driver delivers 50 watts output with programmable Class 2 operation and phase-cut dimming at 120 volts

  • Constant 1300 mA output drives LEDs evenly
  • Class 2 rating limits voltage for safer installs
  • Programmable driver lets you tune current to the load
  • Phase-cut dimming works with standard wall dimmers
  • 50 W capacity handles medium-output fixtures

GE 36535 LED Driver

The GE 36535 GED50DCP2P1300S is a 50 watt constant current LED driver rated for Class 2 operation. It accepts 120 VAC at 60 Hz input and supports phase cut dimming for compatible lighting installations. This programmable driver is intended for indoor lighting projects requiring regulated current output. It suits electricians and installers fitting LED modules that demand a programmable constant current source.

50 Watt Output Power

The driver delivers 50 watts of output power, which determines the maximum LED load it can support. Buyers must match this rating to the total wattage of their LED array to avoid underpowering or overloading the circuit. If the connected load exceeds 50 watts, a higher rated driver will be required.

Thermals Noise and Power Draw

The unit draws 0.5 amps at 120 volts during normal operation. As a solid state driver it operates silently with no moving parts to generate audible noise. Heat output is proportional to the 50 watt load and typical driver efficiency, so adequate ventilation in the fixture or enclosure is recommended.

Highlights

  • Constant 1300 mA output drives LEDs evenly
  • Class 2 rating limits voltage for safer installs
  • Programmable driver lets you tune current to the load
  • Phase-cut dimming works with standard wall dimmers
  • 50 W capacity handles medium-output fixtures

Specifications

BrandGE

Questions about this item

What does the 50 W output power mean for the LEDs I connect to this driver?

The driver can supply up to 50 watts to the LED load, so the combined wattage of all connected fixtures must not exceed that limit.

How does the 120 VAC 60 Hz input and phase-cut dimming interface affect installation?

It connects directly to a standard 120 volt 60 Hz circuit and works with compatible leading-edge or trailing-edge dimmers without extra control wiring.

What physical space and mounting provisions does the GED50DCP2P1300S need?

The unit is designed to fit inside typical lighting enclosures and mounts via its integral tabs or screw holes for secure installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.