Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00936138BTC
In stock
GE
GE Lightech GELD60DMV24PU 60W 120-277V 24V Ballast
Constant-voltage LED driver delivering 60 watts at 24 volts with 120-277 volt input for signs, cabinet lights and tape lights
- Delivers 60 W to power larger LED arrays
- 120–277 V input suits commercial and residential wiring
- 24 V constant-voltage output matches tape and cabinet lights
- Non-dimming design simplifies installation for fixed-brightness fixtures
- GE Lightech model 66926 built for sign and display lighting
GE Lightech 60W Constant-Voltage Driver
The GE Lightech GELD60DMV24PU is a constant-voltage LED driver rated for 60 watts output at 24 volts. It accepts a wide 120-277 volt AC input range, making it suitable for commercial and residential lighting installations. This non-dimming unit supplies steady power to compatible LED arrays.
Installers needing fixed 24V output for tape
This driver suits electricians and installers powering constant-voltage LED tape lights, cabinet lighting or signage that require a 24 volt, 60 watt supply. It is not for projects needing dimming control, a different output voltage, or a power rating above 60 watts.
60 watt 24 volt constant-voltage output
The single deciding specification is the 60 watt, 24 volt constant-voltage output combined with a 120-277 volt input. Match this exactly to the LED array’s voltage and wattage requirements; any mismatch in voltage or power rating means the driver will not operate the fixture correctly.
Highlights
- Delivers 60 W to power larger LED arrays
- 120–277 V input suits commercial and residential wiring
- 24 V constant-voltage output matches tape and cabinet lights
- Non-dimming design simplifies installation for fixed-brightness fixtures
- GE Lightech model 66926 built for sign and display lighting
Specifications
| Brand | Lightech |
|---|
Questions about this item
How much heat does the 60 W driver generate when running continuously?
The unit delivers 60 watts of output power; typical constant-voltage drivers of this class operate at high efficiency, so waste heat stays low enough for enclosed fixtures.
What wiring and LED load must I already have to use this 120-277 V input driver?
You need a 24 V constant-voltage LED array or tape light rated up to 60 W and a supply circuit within the 120-277 V range.
Will this non-dimming 24 V driver work with my existing 12 V halogen transformer wiring?
No, the driver outputs a fixed 24 V and is not compatible with 12 V loads or legacy halogen transformers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
