We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six PAR46 incandescent lamps, 5.75 inch diameter, G53 screw terminal base

Ge Current

Ge Current 24795-4551 PAR46 250W 28V G53 3000K 6-pack

SKU CH-JWFP-FXSCV

Six 250W 28V PAR46 incandescent bulbs with G53 screw-terminal base, 3000K colour and 100 CRI for aircraft lighting

  • Selling Unit6
  • Color3000K
  • Base TypeGU5.3
  • Wattage250
  • Voltage120
  • ShapePAR46
  • High-output 250 W incandescent beam for aviation use
  • Accurate 3000 K colour with 100 CRI rendering
  • Dimmable control for precise cabin lighting
  • Compact 5.75 in PAR46 fits standard fixtures
  • Six-lamp case simplifies fleet maintenance stocking

Aircraft-grade PAR46 lamp set

This pack contains six GE 24795-4551 incandescent lamps built to a 28 V 250 W aviation specification. The PAR46 form factor and G53 screw-terminal base target aircraft lighting positions and compatible ground-support fixtures. Each unit delivers a 3000 K output with a 100 CRI rating for accurate colour rendering in inspection or navigation roles. Rated life is listed at 25 hours under nominal conditions.

Screw-terminal base and sealed reflector

The G53 base uses screw terminals rather than pins, so installation requires a screwdriver and a secure wiring harness — no push-fit convenience. A 5.75 inch diameter sealed reflector resists vibration and moisture ingress typical of rotorcraft and fixed-wing environments. Dimmable operation allows intensity adjustment from the cockpit or console without external ballast. The six-lamp case simplifies fleet spares logistics for maintenance shops.

Thermal load and power profile

At 250 W each lamp draws significant current on a 28 V bus, so wiring and circuit protection must be sized accordingly. The incandescent filament generates concentrated heat across the 5.75 inch reflector face; adequate airflow or heat-sink mounting is essential during extended ground runs. No forced-cooling fan is integrated, so noise is limited to faint filament hum. Power factor is resistive, simplifying electrical load calculations for the aircraft system.

Highlights

  • High-output 250 W incandescent beam for aviation use
  • Accurate 3000 K colour with 100 CRI rendering
  • Dimmable control for precise cabin lighting
  • Compact 5.75 in PAR46 fits standard fixtures
  • Six-lamp case simplifies fleet maintenance stocking

Specifications

BrandGE
Selling Unit6
Color3000K
Base TypeGU5.3
Wattage250
Voltage120
ShapePAR46
Item Count6

Questions about this item

What voltage does the G53 screw-terminal base on this PAR46 lamp operate at?

The lamp is rated for 28 volts and draws 250 watts through its G53 screw-terminal base.

Will the 5.75 inch diameter PAR46 envelope fit my existing fixture?

The bulb measures 5.75 inches across the PAR46 face, so verify your fixture accepts that diameter before installing.

How do I connect the screw terminals without damaging the 250 W filament?

Ensure power is off, tighten each terminal screw firmly onto the bare wire leads, and avoid over-torquing the G53 base to prevent filament stress.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.