We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular electronic fluorescent ballast, light grey finish, terminal connections visible

GE

GE Current 204 W 2-Lamp Electronic Light Kit GE296H0-MVPS-N

SKU CH-FQ5T-2ECW0

Electronic fluorescent ballast kit runs one or two T12 lamps up to 85 watts each on 120-277 volt input

  • weight1.85
  • materialHAWA
  • Electronic ballast starts lamps efficiently
  • Operates on 120 to 277 V AC input
  • Supports one or two fluorescent lamps
  • Maximum bulb wattage up to 85 W
  • Starts reliably at minus 20 °F

GE Current 204 W 2-Lamp Electronic Light Kit

This GE Current electronic light kit operates two fluorescent lamps at a total of 204 watts. It accepts an input voltage range of 120 to 277 volts AC and uses a programmed start method. The unit weighs 1.85 units and is built with HAWA material. It supports T12 bulb types with maximum bulb wattages of 60, 75, and 85 watts.

Suitable For And Not For

This kit suits installations requiring programmed start ballasts for one or two T12 lamps within the listed wattages. It works for multi-voltage wiring between 120 and 277 volts AC. It does not suit projects needing dimming capability or CA Title 20 compliance. Buyers needing instant start or rapid start ballasts should look elsewhere.

Deciding Specification

The programmed start type and 120 to 277 volt AC input range are the key specifications. Confirm your lamps are T12 type and fall within the 60, 75, or 85 watt maximum ratings. Verify that dimming is not required for the installation. The 204 watt total rating and 1.85 weight complete the critical data.

Highlights

  • Electronic ballast starts lamps efficiently
  • Operates on 120 to 277 V AC input
  • Supports one or two fluorescent lamps
  • Maximum bulb wattage up to 85 W
  • Starts reliably at minus 20 °F

Specifications

BrandGE CURRENT
weight1.85
materialHAWA

Questions about this item

Should I choose a 60 W, 75 W or 85 W bulb for this ballast?

The ballast supports one or two T12 fluorescent bulbs rated at 60 W, 75 W or 85 W each, so pick the wattage that matches the lamps you plan to install.

What does the 204 W rating mean once the kit is installed?

The 204 W figure is the total input power the ballast draws when driving two lamps at their maximum supported wattage.

What does the 120 to 277 V AC input range cap in practice?

The ballast operates on any supply between 120 V and 277 V AC, so it works on standard 120 V circuits and on 277 V commercial lighting circuits without rewiring.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.