We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent rectangular lighting contactor with terminal screws and mounting tabs

GE

GE CR463L20ANA10A0 277VAC 2P 30A Lighting Contactor

SKU CH-V0VK-6035V

Controls 30 A fluorescent or 20 A tungsten lighting at 277 V AC with a 2-pole electrically held contactor

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reliable LED lighting control at 10 A rating
  • Handles tungsten loads up to 20 A current
  • Manages fluorescent circuits up to 30 A
  • Operates on 240/277 V AC coil voltage
  • CR460 series electrically held contactor with 2 poles

Industrial Lighting Contactor

This GE CR463L20ANA10A0 is an electrically held magnetic contactor designed for switching lighting circuits in commercial and industrial installations. It serves electricians and facility managers who need reliable control of specific load types at 277VAC.

Coil Voltage And Load Ratings

The contactor operates on a 240/277V AC coil and carries a 30A inductive full-load current rating. It handles tungsten loads up to 20A and LED loads up to 10A, while fluorescent lighting is rated at 30A. Motor loads are rated at 1hp at 120VAC and 2hp at 240VAC single phase.

NEMA 1 Enclosure And Mounting

A NEMA 1 enclosure rating indicates the device is intended for indoor mounting where it is protected from falling dirt. The non-reversing, two-pole configuration suits standard branch-circuit switching. Transparent housing allows visual inspection of contact status during maintenance checks.

Highlights

  • Reliable LED lighting control at 10 A rating
  • Handles tungsten loads up to 20 A current
  • Manages fluorescent circuits up to 30 A
  • Operates on 240/277 V AC coil voltage
  • CR460 series electrically held contactor with 2 poles

Specifications

BrandGE
ModelCR463L20ANA10A0
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Should I pick the 10 A LED or the 30 A fluorescent rating for my load?

Choose the rating that matches your lamp type: 10 A for LED, 20 A for tungsten, and 30 A for fluorescent or inductive loads.

Will the 277 VAC coil work on a standard 240 V circuit?

Yes, the coil is rated for both 240 V AC and 277 V AC, so it operates on either voltage.

Does the NEMA 1 enclosure limit where I can mount this contactor?

NEMA 1 is for indoor use only; it protects against falling dirt but not water or dust.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.