GE
GE CR101Y11 Manual Motor Starter NEMA 16A 230VAC/DC video accessory
A manual motor starter with a toggle operator rated for 16 A at 230 V AC/DC and a NEMA 1 enclosure
- TypeNEMA, Toggle
- ColorTransparent
- Manual toggle control for simple motor operation
- 16 A rating handles single-phase loads up to 1 hp at 240 V AC
- 230 V AC/DC maximum voltage suits industrial and commercial circuits
- NEMA 1 enclosure protects internals in indoor environments
- Compact 2.63 in depth by 4.16 in height fits tight panels
Manual Motor Starter CR101Y11
The GE CR101Y11 is a single-pole manual motor starter rated for 16 A at up to 230 V AC or DC. It uses a toggle operator and provides thermal overload protection in a NEMA 1 enclosure. The unit suits small single-phase motor circuits in commercial or light-industrial settings.
Toggle operator and NEMA 1 enclosure
The toggle switch gives direct on-off control without a separate contactor coil supply. A NEMA 1 rating means the starter fits inside a standard indoor panel or junction box. Overall depth is 2.63 in and overall height is 4.16 in, so it occupies minimal space on a DIN rail or back-plate.
1 hp at 120 V or 240 V single phase
The starter handles 1 hp loads at either 120 V AC or 240 V AC single phase. Thermal protection requires one correctly sized heater element, which is not included. It is not suited for three-phase motors, higher horsepower ratings, or applications needing magnetic overload or remote control.
Highlights
- Manual toggle control for simple motor operation
- 16 A rating handles single-phase loads up to 1 hp at 240 V AC
- 230 V AC/DC maximum voltage suits industrial and commercial circuits
- NEMA 1 enclosure protects internals in indoor environments
- Compact 2.63 in depth by 4.16 in height fits tight panels
Specifications
| Brand | GE |
|---|---|
| Model | CR101Y11 |
| Type | NEMA, Toggle |
| Color | Transparent |
Questions about this item
What is the maximum continuous current the CR101Y11 can handle before thermal overload trips?
The thermal overload protection trips at 16 A AC, which is the rated current for this single-pole starter.
How much heat does the starter dissipate when carrying 16 A all day inside a NEMA 1 enclosure?
At 16 A the unit warms noticeably but stays within its thermal design; the 2.63 in depth and 4.16 in height provide the rated dissipation surface.
Does the toggle operator require a separate 230 V AC/DC control supply to operate?
No, the toggle is a manual mechanical operator; it switches the 230 V AC/DC load directly without any auxiliary control voltage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



