We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular GE 93100 LED driver 18W 120-277V IP66

GE

GE 93100 18W Non-Dimmable LED Driver 120/277V 2-Lamp

SKU CH-4V5H-3210D

Powers up to two 2 ft LED T8 tubes with 18 W constant-current output, 270 mA per lamp, 26–34 VDC, 120–277 VAC input, IP66 rated and –40 °F cold start

  • wattage18
  • voltage120
  • Drives up to two LED tubes efficiently
  • 18W constant current output at 270mA per lamp
  • Operates on 120-277VAC universal input range
  • IP66 rated for dust and water protection
  • Starts reliably at -40F in cold environments

Driver for two 2 ft LED tubes

The GE 93100 is an 18W constant-current LED driver built for indoor T8 tubes. It powers up to two 2 ft lamps on a 120-277VAC supply. The unit is rated IP66 and starts at -40F. It suits commercial or residential retrofits that need simple non-dimming operation.

270mA per lamp output current

Each connected tube receives a steady 270mA at 26-34VDC. This fixed current is the critical parameter; tubes must match it for correct brightness and lifetime. The driver will not work with lamps that require a different current or a dimming interface.

18W total power ceiling

The 18W input limit comfortably runs two compatible 2 ft tubes within the 26-34VDC window. Adding a third tube or using higher-wattage lamps would exceed the driver’s capacity. The IP66 rating and surge resistance give headroom for harsh environments, but the power ceiling is fixed.

Highlights

  • Drives up to two LED tubes efficiently
  • 18W constant current output at 270mA per lamp
  • Operates on 120-277VAC universal input range
  • IP66 rated for dust and water protection
  • Starts reliably at -40F in cold environments

Specifications

BrandGE
wattage18
voltage120

Questions about this item

What does the 18 watt rating mean once the driver is installed?

The 18 watt rating is the maximum input power the driver draws from the mains when powering up to two LED tubes.

What does the 120-277 volt input range cap in practice?

The driver accepts any supply voltage between 120 and 277 volts AC, so it works on standard North American residential and commercial circuits without rewiring.

What does the IP 66 rating require for mounting?

The IP 66 rating means the enclosure is dust-tight and protected against powerful water jets, allowing installation in damp or outdoor locations without additional weatherproofing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.