GE
GE 93002 LED 2 Pin G24d-2 10.5W 120V 2700K 1000lm 80 CRI standard bulb
A 10.5W LED lamp replaces 2-pin G24d-2 CFLs with 1000 lumens of 2700K warm white light at 80 CRI
- Selling Unit1
- TypeLed Household Light Bulbs
- ColorWarm White
- Base TypeG24d-2
- Wattage10.5
- Voltage120
- 5 W LED replaces higher-wattage CFL
- Warm 2700 K light creates inviting atmosphere
- 1000 lumens brightens dark corners effectively
- 80 CRI renders colours naturally
- G24d-2 2-pin base fits existing fixtures
2-pin G24d-2 LED replacement
This GE 93002 lamp fits G24d-2 sockets and runs on 120 V power. It draws 10.5 W while producing 1000 lumens of 2700 K warm white light with an 80 CRI rating. The unit is sold new as a single bulb for direct CFL replacement.
Steady output on 120 V circuits
The lamp maintains its 1000 lumen output continuously at the rated 10.5 W draw without the warm-up delay typical of fluorescent tubes. Colour rendering stays consistent at 80 CRI during extended operation. No flicker or colour shift appears as the driver reaches thermal equilibrium.
Replaces 2-pin CFL plug-in lamps
The G24d-2 base allows direct installation in existing 2-pin magnetic ballast fixtures without rewiring. The upgrade is worthwhile when instant full brightness and longer rated life are preferred over aging CFLs. Buyers needing 4-pin electronic ballast compatibility or higher lumen packages should look elsewhere.
Highlights
- 5 W LED replaces higher-wattage CFL
- Warm 2700 K light creates inviting atmosphere
- 1000 lumens brightens dark corners effectively
- 80 CRI renders colours naturally
- G24d-2 2-pin base fits existing fixtures
Specifications
| Brand | GE |
|---|---|
| Selling Unit | 1 |
| Type | Led Household Light Bulbs |
| Color | Warm White |
| Base Type | G24d-2 |
| Wattage | 10.5 |
| Voltage | 120 |
| Item Count | 1 |
Questions about this item
How much heat does the 10.5W LED produce when running all day?
At 10.5 watts the lamp generates far less heat than the CFL it replaces, so the fixture stays cool even after hours of continuous use.
What fixture base is required for the G24d-2 pins to work?
The lamp needs a horizontal 2-pin G24d-2 socket wired for 120V; it will not fit 4-pin or G24q bases.
Will the 2700K warm-white output match the older CFLs I keep in the same room?
Yes, the 2700K colour temperature and 80 CRI closely mimic the warm glow of traditional CFLs, giving consistent lighting side by side.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



