GCROWN
GCROWN 90W 65W ac adapter Dell Latitude 7.4 5.0mm
Replacement power adapter delivering 90W or 65W output with a 7.4mm by 5.0mm connector for compatible Dell Latitude laptops
- Battery TypeLithium-Ion
- Delivers 90W or 65W power for demanding workloads
- Works with Dell Latitude models from D400 to E7450
- 4×5.0 mm connector matches original Dell barrel plug
- Worldwide 100-240 V input suits travel and office use
- CE, FCC and RoHS certified for safe operation
90W and 65W dual-output adapter
The GCROWN adapter delivers 19.5V at 4.62A for 90W or 3.34A for 65W, matching the power profiles of many Dell Latitude models. It accepts 100-240V input at 50/60Hz for worldwide use. The 7.4mm by 5.0mm barrel connector fits the listed Latitude families. The unit is new and carries CE, FCC and ROHS certifications.
Steady output under continuous load
Rated for 90W maximum, the adapter maintains its 19.5V output during prolonged charging sessions without dropping to a lower wattage mode. The 65W compatibility means it also serves systems that draw less current while keeping voltage stable. Certification testing confirms compliance with safety limits for sustained operation. No thermal-throttling behaviour is specified in the data.
Verify connector and part number first
Confirm that the laptop uses a 7.4mm by 5.0mm barrel tip before ordering. Cross-reference the device’s original part number against the compatible list such as PA10, DA90PE1-00 or 310-2862. Ensure the required input voltage range covers your local mains supply. Buyers needing a different tip size or a higher wattage rating should look elsewhere.
Highlights
- Delivers 90W or 65W power for demanding workloads
- Works with Dell Latitude models from D400 to E7450
- 4×5.0 mm connector matches original Dell barrel plug
- Worldwide 100-240 V input suits travel and office use
- CE, FCC and RoHS certified for safe operation
Specifications
| Battery Type | Lithium-Ion |
|---|
Questions about this item
How much heat does the 90W GCROWN adapter produce when running all day?
The adapter delivers 19.5V at 4.62A for 90W output and is CE, FCC and ROHS certified, which means it meets standard safety and efficiency limits for continuous operation.
What must I already own to use this 7.4*5.0mm charger?
You need a Dell Latitude model that accepts a 7.4mm by 5.0mm barrel connector and requires 19.5V input, such as the Latitude E5440, E5450, E5530, E5540, E5550, E6220, E6230, E6320, E6330, E6400, E6410, E6420, E6430, E6440, E6500, E6510, E6520, E6530, E6540, E7240, E7250, E7440 or E7450.
Will this 90W unit work alongside my older 65W Dell PA-10 brick?
Yes, the adapter is rated for both 90W (19.5V 4.62A) and 65W (19.5V 3.34A) operation and lists PA-10 and PA-12 among its compatible part numbers, so it can replace either brick on supported Latitude models.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



