We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular die-cast aluminium converter, sealed matte finish, IP68 waterproof rating

GCON

GCON DC-DC Step-Down Converter 12V-24V to 6V 10A 60W IP68

SKU CH-6S3P-DY852

Steps 12-24 V input down to 6 V at 10 A with IP68 waterproofing and 96% efficiency

  • Converts 12V or 24V input to stable 6V 10A 60W output
  • Accepts wide 9V to 35V input range for flexible installation
  • IP68 waterproof housing withstands rain and wet environments
  • Five protection circuits guard against overload, overcurrent, overtemperature, short circuit and overvoltage
  • Up to 96% conversion efficiency keeps heat low and extends service life to 100000 hours

DC-DC Step-Down Converter for 6V Systems

This GCON buck converter steps down a DC input between 9 and 35 volts to a stable 6 volt output rated at 10 amps and 60 watts. It targets owners of golf carts, forklifts and similar vehicles that run on 12 or 24 volt batteries but need to power 6 volt accessories such as radios, GPS units or LED lighting.

IP68 Housing with Five Protection Circuits

The die-cast aluminium shell is silicone sealed and epoxy potted for an IP68 waterproof rating, allowing operation in rain or wet environments. Built-in safeguards cover over-load, over-current, over-temperature, short-circuit and over-voltage conditions, while synchronous rectification delivers up to 96 percent efficiency and a rated lifetime of 100000 hours.

Simple Two-Wire Installation with Polarity Care

Wiring requires only connecting the input leads to the source battery and the output leads to the 6 volt load, with free-air convection cooling that needs no fan or extra heatsink. The non-isolated topology means the input and output share a common ground, so reverse polarity or an input voltage above 35 volts will damage the unit.

Highlights

  • Converts 12V or 24V input to stable 6V 10A 60W output
  • Accepts wide 9V to 35V input range for flexible installation
  • IP68 waterproof housing withstands rain and wet environments
  • Five protection circuits guard against overload, overcurrent, overtemperature, short circuit and overvoltage
  • Up to 96% conversion efficiency keeps heat low and extends service life to 100000 hours

Specifications

No published specifications for this item yet.

Questions about this item

Does the converter need any periodic maintenance such as fan cleaning or thermal-paste replacement?

No moving parts or user-serviceable items are present; the potted, fanless aluminium housing relies on free-air convection and is rated for over 100000 hours of continuous operation.

What limits sustained output before the unit shuts down or throttles?

The over-temperature protection activates if the internal temperature rises too high, capping the 10 A / 60 W output until the die-cast housing can dissipate the heat.

How much heat and noise does the converter produce when running all day at full load?

At up to 96 % efficiency the waste heat is low and the free-air convection design is completely silent with no fan.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.