Gates
Gates XPZ1512 Metric V-Belt 1512 mm Outside Length
Metric V-belt with 1512 mm outside length, 10 mm top width and 8 mm thickness, built from fiber-loaded elastomeric compound with polyester tensile cords for heat, oil.
- MaterialHAWA
- 1512 mm outside length fits XPZ drives
- 10 mm top width matches standard pulleys
- Cogged raw-edge construction improves flexibility
- HAWA compound resists heat oil ozone flame
- Operates from -30 to 140 degrees F
Gates XPZ1512 Metric V-Belt 1512 mm
The Gates XPZ1512 is a single-rib metric V-belt designed for lifting, pulling and conveying applications. It suits maintenance engineers and machine builders who need a direct replacement for an XPZ-section belt with a 1512 mm outside length.
Capacity and headroom
The belt measures 1512 mm outside length, 10 mm top width and 8 mm thickness, fitting standard XPZ pulleys in drives that require this exact size. It operates reliably between -30 and 140 degrees F and resists heat, oil, ozone and flame, but it cannot serve drives that call for a different section, length or rib count.
Build quality and connectors
A fibre-loaded elastomeric compound with polyester tensile cords gives the belt strength and durability, while the cogged, raw-edge construction improves flexibility and grip on the pulley. The single-rib profile means it mounts on standard XPZ grooves without special tooling, simplifying day-to-day replacement and alignment.
Highlights
- 1512 mm outside length fits XPZ drives
- 10 mm top width matches standard pulleys
- Cogged raw-edge construction improves flexibility
- HAWA compound resists heat oil ozone flame
- Operates from -30 to 140 degrees F
Specifications
| Brand | GATES |
|---|---|
| Material | HAWA |
Questions about this item
Will the 1512 mm outside length match the pulley spacing on my existing drive?
The belt has an outside length of 1512 mm and a top width of 10 mm; verify your pulley centre distance and groove profile against those dimensions before fitting.
How can I confirm the XPZ1512 is seated correctly after installation?
With the drive running, check that the single rib tracks centrally in the pulley groove, the cogged raw-edge construction engages without flap, and the belt runs within the -30 to 140 °F temperature range.
Does the box include any tensioning hardware or just the belt?
Only the Gates XPZ1512 metric V-belt is supplied; tensioners, pulleys or installation tools must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
