We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black synthetic rubber fuel injection hose coil 3/8 inch inside diameter 25 foot length

Gates

Gates 27341 Fuel Injection Hose 3/8 in 25 ft

SKU CH-3A5V-KEW45

3/8 in fuel injection hose in a 25 ft bulk roll rated to 225 psi and SAE J30R14 Type 2

  • Meets SAE J30R14 Type 2 standard for fuel-injection systems
  • 25 ft bulk length lets you cut exact runs
  • Spiral reinforcement handles 225 psi at 70 °F
  • Synthetic rubber tube and cover survive -40 °F to 275 °F
  • 3/8 in inside diameter fits common fuel-rail fittings

Fuel injection hose 3/8 in ID

This Gates 27341 hose carries pressurised fuel in automotive and RV systems. The 25 ft bulk length lets you cut exact runs for custom routing. It meets SAE J30R14 Type 2 standards for fuel injection service.

Check working pressure and temperature range

Verify your system never exceeds 225 psi at 70 F and stays within -40 to 275 degrees F. Confirm the 3/8 in inside diameter matches your fittings and that synthetic rubber is compatible with your fuel blend. Ensure spiral reinforcement suits the vibration environment.

Bulk hose requires cutting and clamps

The 25 ft roll arrives without end fittings, so you must cut to length and install appropriate clamps. No adapters, ferrules or installation tools are included in the package. California Proposition 65 warnings apply to the hose materials.

Highlights

  • Meets SAE J30R14 Type 2 standard for fuel-injection systems
  • 25 ft bulk length lets you cut exact runs
  • Spiral reinforcement handles 225 psi at 70 °F
  • Synthetic rubber tube and cover survive -40 °F to 275 °F
  • 3/8 in inside diameter fits common fuel-rail fittings

Specifications

BrandGATES

Questions about this item

Does the 25 ft bulk hose include fittings or clamps, or must they be purchased separately?

The hose is supplied as 25 ft of bulk SAE J30R14 Type 2 fuel-injection hose with no fittings or clamps included; appropriate barbed or clamp-on fittings must be sourced separately.

Should I choose a different inside diameter or pressure rating for a high-pressure fuel-injection system?

This hose has a 3/8 in inside diameter and a maximum working pressure of 225 psi at 70 °F, meeting SAE J30R14 Type 2 for standard fuel-injection use; select a different diameter or rating only if your system specifies otherwise.

Will the 225 psi rating hold at the temperature extremes of -40 °F to 275 °F?

The 225 psi maximum working pressure is specified at 70 °F; pressure capacity decreases as temperature rises toward 275 °F, so system design must account for the lower rating at operating temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.