We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue silicone coolant hose 1 inch diameter 36 inches long straight cut

Gates

Gates 24816 Silicone Coolant Hose 1 in 36 in Blue

SKU CH-WV4H-30TFA

Straight blue silicone coolant hose, 36 in long with 1 in bore, rated to 90 psi and -70 to 350 °F per SAE 20R1

  • Silicone construction resists extreme temperatures from -70 to 350 degrees F
  • 90 psi working pressure at 70 degrees F meets SAE 20R1 standard
  • 36 inch straight length fits custom routing without extra fittings
  • Blue colour simplifies coolant-line identification in busy engine bays
  • Brand-new Gates hose ships ready for immediate installation

Gates 24816 Silicone Coolant Hose

The Gates 24816 is a straight silicone coolant hose with a one-inch inside diameter and a thirty-six-inch length. Its blue silicone tube and cover handle temperatures from minus seventy degrees to three hundred fifty degrees Fahrenheit. It meets SAE 20R1 standards and is rated for ninety psi maximum working pressure at seventy degrees Fahrenheit. Automotive technicians and cooling-system builders use it for custom routing.

Installation notes

The hose is flexible and cuts cleanly with a sharp knife, then slides over one-inch barbs or nipples for clamping. Common issues include kinking if bent tighter than the material allows, and leaks from loose or misaligned clamps on the smooth silicone surface. Ensure the hose is fully seated before tightening clamps to prevent blow-off under pressure.

Pre-order checks

Verify your system uses one-inch inside-diameter connections and that a straight thirty-six-inch run fits the intended routing. Confirm the operating temperature and pressure stay within the minus seventy to three hundred fifty degrees Fahrenheit range and ninety psi limit. Check local regulations, as this product carries California Proposition 65 warnings for cancer and reproductive harm.

Highlights

  • Silicone construction resists extreme temperatures from -70 to 350 degrees F
  • 90 psi working pressure at 70 degrees F meets SAE 20R1 standard
  • 36 inch straight length fits custom routing without extra fittings
  • Blue colour simplifies coolant-line identification in busy engine bays
  • Brand-new Gates hose ships ready for immediate installation

Specifications

BrandGATES

Questions about this item

How can I confirm the hose is performing correctly once installed?

The hose should hold coolant at up to 90 psi at 70 F without leaks and remain flexible across the -70 to 350 F temperature range.

What comes with the hose and what extra parts are needed?

The box contains the 36 in straight silicone hose with 1 in inside diameter; clamps or fittings must be purchased separately.

Which length and diameter version should I select for my application?

Choose the 36 in length and 1 in inside diameter listed as part 24816; other sizes carry different part numbers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.