We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White plastic ceiling fan pull-chain switch with brass terminals and 6-inch leads

Gardner Bender

Gardner Bender SPST 3-Speed Pull Chain Switch GSW-34 ceiling medallion

SKU CH-FXXC-ZVZPR

Controls ceiling-fan speed with a three-position pull chain and four stab-in wiring slots

  • weight0.1
  • Three-speed control for tailored airflow
  • SPST switching with simple pull-chain operation
  • Four stab-type slots accept 18-gauge wire
  • UL listed for verified electrical safety
  • Rated 1.5 A at 250 V AC and 3 A at 250 V AC

Switch Function

The Gardner Bender GSW-34 is a single-pole single-throw pull chain switch designed for ceiling fan speed control. It provides three distinct speed settings plus an off position for residential or light commercial installations.

Wiring and Ratings

The switch accepts 18-gauge solid or stranded wire through four stab-type terminals. It carries UL listing and is rated for 1.5A at 250V AC, 3A at 250V AC and 6A at 125V AC.

Operation

A six-inch lead connects the switch to the fan wiring for straightforward installation. The pull chain mechanism toggles cleanly between off and three speed levels during normal use.

Highlights

  • Three-speed control for tailored airflow
  • SPST switching with simple pull-chain operation
  • Four stab-type slots accept 18-gauge wire
  • UL listed for verified electrical safety
  • Rated 1.5 A at 250 V AC and 3 A at 250 V AC

Specifications

BrandGARDNER BENDER INC
weight0.1

Questions about this item

What does the 3-speed Off/On/On/On sequence actually do when installed in a ceiling fan?

Pulling the chain cycles the fan through three distinct speed settings plus an off position, giving low, medium and high airflow from a single switch.

How do the 1.5A/250V AC and 6A/125V AC ratings limit the fans this switch can control?

The switch is UL listed for loads up to 1.5 amps at 250 volts AC or 6 amps at 125 volts AC, so the fan motor must stay within those current limits.

What ceiling thickness and hole size does the 6-inch lead and threaded bushing require for mounting?

The 6-inch leads reach through standard canopy depths, and the threaded bushing fits the typical 3/8-inch mounting hole used on most fan housings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.