We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack with black plastic casing and connector for iRobot Braava Jet M6

FYIOGXG Replacement Battery for iRobot Braava Jet M6 2000mAh 10.8V

SKU CH-964E-24RTX

A 2000 mAh 10.8 V lithium-ion replacement battery for the iRobot Braava Jet M6, measuring 73.30 x 58.40 x 46.50 mm and weighing 176.8 g

  • Specifications73.30 x 58.40 x 46.50
  • Typelithium_ion
  • Battery Pack73.30 x 58.40 x 46.50
  • Battery Typelithium_ion
  • Battery Capacity2000.00 milliamp_hours
  • Battery Voltage10.80 volts
  • Fits iRobot Braava Jet M6 with 2000mAh capacity
  • Delivers 10.8V 21.60Wh lithium-ion power
  • Built to original specs with decoded chip
  • Includes overcharge and short-circuit protection
  • Certified to ISO9001 RoHS and CE standards

Replacement Battery for Braava Jet M6

This FYIOGXG lithium-ion pack replaces the iRobot ALB-C and M611020 cells in the Braava Jet M6 mop. It delivers 2000mAh at 10.8 volts for 21.60Wh of runtime. The fully decoded chip communicates with the robot exactly like the original unit. Buyers needing a different voltage or form factor cannot use this pack.

Thermal behaviour and safety protections

Integrated circuitry guards against overcharge, over-discharge, over-voltage and short-circuit events during daily cleaning cycles. The cell chemistry is certified to ISO9001, RoHS and CE standards. No active cooling is required; the battery operates within the robot's sealed compartment. Users who expect hot-swap capability or external charge indicators will not find them here.

Installation and system fit

The pack measures 73.30 x 58.40 x 46.50mm and weighs 176.8g, matching the OEM footprint for a direct drop-in. A replacement cycle typically reaches full capacity after two or three charge-discharge sequences. Shock-absorbing foam protects the cell during transit. Builders integrating this cell into a custom device must verify connector polarity and enclosure clearance themselves.

Highlights

  • Fits iRobot Braava Jet M6 with 2000mAh capacity
  • Delivers 10.8V 21.60Wh lithium-ion power
  • Built to original specs with decoded chip
  • Includes overcharge and short-circuit protection
  • Certified to ISO9001 RoHS and CE standards

Specifications

BrandFYIOGXG
ModelReplacement battery
Specifications73.30 x 58.40 x 46.50
Typelithium_ion
Battery Pack73.30 x 58.40 x 46.50
Battery Typelithium_ion
Battery Capacity2000.00 milliamp_hours
Battery Voltage10.80 volts

Questions about this item

How do I install the FYIOGXG battery in my Braava Jet M6 and what step is often missed?

Open the battery compartment, remove the old pack, align the connector on the 73.30 x 58.40 x 46.50 mm lithium-ion unit, press it firmly until it clicks, then close the cover. The step people miss is fully seating the connector — if it is not latched the robot will not power on.

What maintenance will this 2000mAh 10.8V replacement battery need later?

No routine maintenance is required. After fitting, run two or three full charge and discharge cycles to reach peak capacity. Keep the robot off the charger for long storage, avoid temperatures above 60 °C, and replace the pack when run-time drops below your needs.

What limit appears first during sustained cleaning with this 21.60 Wh pack?

The 2000 mAh capacity sets the run-time ceiling. Under continuous mopping the robot will deplete the 10.80 V cells and return to the dock for recharge before any thermal or protection limit is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.