FYIOGXG Replacement Battery for Dreame T20 Pro 2700mAh 25.2V
Lithium-polymer replacement battery delivering 2700 mAh at 25.2 V for Dreame T20 Pro cordless vacuums
- Specifications147.60 x 81.00 x 35.00
- Typelithium_polymer
- Battery Pack147.60 x 81.00 x 35.00
- Battery Typelithium_polymer
- Battery Capacity2700.00 milliamp_hours
- Battery Voltage25.20 volts
- Direct replacement for Dreame T20 Pro vacuum
- 2700 mAh capacity delivers 68.04 Wh runtime
- 2 V lithium-polymer chemistry matches original spec
- Built-in protection guards against overcharge and short circuit
- ISO 9001 certified production ensures consistent quality
Direct Replacement for Dreame T20 Pro
This lithium-polymer battery matches the original 25.2 V, 2700 mAh pack used in the Dreame T20 Pro cordless vacuum. It is built to the same 147.60 x 81.00 x 35.00 mm footprint and weighs 489.0 g. The fully decoded chip communicates with the vacuum exactly like the factory cell. Buyers who need a different voltage or capacity should look elsewhere.
Voltage and Capacity Must Match
The single specification that decides fit is the 25.20 V / 2700 mAh rating paired with the Dreame part number P2032-7S1P-BWB. If your original battery shows different voltage or capacity values, this unit will not work correctly. No other electrical parameter overrides this requirement.
Simple Swap With Connector Care
Installation follows the many online videos: remove the old pack, align the connector, and press until it clicks. The most common issue is a partially seated connector, which prevents the vacuum from recognising the new battery. The pack includes over-charge, over-discharge, over-voltage and short-circuit protection, and ships in shock-absorbing foam.
Highlights
- Direct replacement for Dreame T20 Pro vacuum
- 2700 mAh capacity delivers 68.04 Wh runtime
- 2 V lithium-polymer chemistry matches original spec
- Built-in protection guards against overcharge and short circuit
- ISO 9001 certified production ensures consistent quality
Specifications
| Brand | FYIOGXG |
|---|---|
| Model | Replacement for |
| Specifications | 147.60 x 81.00 x 35.00 |
| Type | lithium_polymer |
| Battery Pack | 147.60 x 81.00 x 35.00 |
| Battery Type | lithium_polymer |
| Battery Capacity | 2700.00 milliamp_hours |
| Battery Voltage | 25.20 volts |
Questions about this item
What runtime can I expect from the 2700mAh capacity in my Dreame T20 Pro?
The 2700mAh capacity at 25.2V delivers 68.04Wh, matching the original battery specification for equivalent run time per charge.
Does the 25.2V rating match the original Dreame P2032-7S1P-BWB pack voltage?
Yes, 25.2V is the exact nominal voltage of the original 7S lithium polymer pack, so the vacuum's power management sees no difference.
Will the 147.60 x 81.00 x 35.00mm dimensions fit the T20 Pro battery compartment?
Those dimensions replicate the OEM pack size, so the battery slides into the T20 Pro compartment and locks without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



