We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc camera battery with silver label, 92 by 46 by 23 millimetres

FYIOGXG Replacement Battery 2100mAh 6.0V NiZn

SKU CH-C0DY-PD09V

Nickel-zinc replacement battery delivers 2100 mAh at 6.0 V for compatible Canon cameras

  • Typenickel_zinc
  • Pack92.38 x 46.96 x 22.85
  • Chemicalnickel_zinc
  • Capacity2100.00 milliamp_hours
  • CompatibilityRadio
  • 2100mAh NiZn chemistry delivers extended shooting time
  • 0V output matches original Canon specifications
  • Compatible with over 30 Canon camcorder models
  • Built-in protection guards against overcharge and short circuit
  • New fully decoded chip works like the original battery

Compatible Canon Camcorder Models

This replacement battery fits Canon UCS20, UCS3, UCS5, UC-V1Hi, UCX65Hi, VME70, VME70A, VME77, VME800H and VTLC50 camcorders. It also matches original part numbers BP-711, BP-714, BP-726, BP-818, BP-E718, BP-E722, BP-E77, BP-E77K and BP-E818. The fully decoded chip communicates with the camera exactly like the original unit.

Nickel-Zinc Chemistry Upgrade

The pack uses nickel-zinc chemistry rated at 6.0 volts and 2100 milliampere-hours, delivering 12.60 watt-hours of energy. This chemistry replaces older nickel-cadmium or nickel-metal-hydride packs in the listed models, offering higher voltage and capacity without changing the physical footprint. The jump is worthwhile when the original cells no longer hold a charge or when longer recording time is needed.

Pre-Purchase Verification Steps

Confirm the exact model number printed on your camcorder and the part number on the old battery before ordering. Ensure the connector orientation matches the cavity in your device. Plan for two to three full charge and discharge cycles to reach peak performance, and avoid low-quality third-party chargers that can reduce service life.

Highlights

  • 2100mAh NiZn chemistry delivers extended shooting time
  • 0V output matches original Canon specifications
  • Compatible with over 30 Canon camcorder models
  • Built-in protection guards against overcharge and short circuit
  • New fully decoded chip works like the original battery

Specifications

BrandFYIOGXG
ModelReplacement battery
Typenickel_zinc
Pack92.38 x 46.96 x 22.85
Chemicalnickel_zinc
Capacity2100.00 milliamp_hours
CompatibilityRadio

Questions about this item

What are the exact dimensions of this 92.38 x 46.96 x 22.85 mm battery for my Canon camcorder?

The battery measures 92.38 mm long, 46.96 mm wide and 22.85 mm thick, matching the original Canon BP-711 form factor for a secure fit in the battery compartment.

How do I install this 6.0 V NiZn pack, and what is the step users often miss?

Slide the pack into the camcorder until the latch clicks, then verify the decoded chip contacts align — many users forget to seat the connector fully before closing the door.

When will this 2100 mAh NiZn cell need replacement, and how can I extend its life?

Expect 300–500 full cycles; after 2–3 initial charge/discharge cycles capacity stabilises, and avoiding storage above 60 °C plus using only the original charger maximises service life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.