We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack with dark casing and gold contacts

FYIOGXG Battery For Tait TP8100-TP9400 2600mAh 7.4V

SKU CH-1JPS-RMCF2

Replacement lithium-ion battery for Tait TP8100, TP8110, TP8115, TP8120, TP8135, TP8140, TP9300 and TP9400 radios, 2600 mAh at 7.4 V

  • Specifications118.30 x 58.70 x 36.70
  • Typelithium_ion
  • Battery Pack118.30 x 58.70 x 36.70
  • Battery Typelithium_ion
  • Battery Capacity2600 milliamp_hours
  • Battery Voltage7.4 volts
  • Compatible with Tait TP8100, TP8110, TP8115, TP8120, TP8135, TP8140, TP9300, TP9400 radios
  • 2600mAh lithium-ion capacity delivers 19.24Wh for extended talk time
  • 4V output matches original battery specification exactly
  • Dimensions 118.30 x 58.70 x 36.70mm ensure proper fit in radio housing
  • ISO9001, RoHS and CE certified with overcharge, over-discharge and short-circuit protection

Compatible Tait radio models

This FYIOGXG lithium-ion battery replaces the original pack in Tait TP8100, TP8110, TP8115, TP8120, TP8135, TP8140, TP9300 and TP9400 two-way radios. It matches the 7.4 V, 2600 mAh rating and the 118.30 x 58.70 x 36.70 mm form factor of the OEM cells. The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short circuit.

Replaces OEM part numbers

Direct substitutes for Tait T03-00011-CAAA, TPA-BA-100, TPK-BA-100, TPK-BA-101 and TT35L1-D. The jump is worth it when the original pack no longer holds a full shift charge or shows swelling. Users who need higher capacity than 2600 mAh or a different voltage should look elsewhere.

Simple battery swap

The pack slides into the radio battery rail and locks with the existing latch; no tools or soldering are required. Online installation videos demonstrate the procedure in under a minute. The most common mistake is ordering without verifying the exact model number and part number printed on the old battery.

Highlights

  • Compatible with Tait TP8100, TP8110, TP8115, TP8120, TP8135, TP8140, TP9300, TP9400 radios
  • 2600mAh lithium-ion capacity delivers 19.24Wh for extended talk time
  • 4V output matches original battery specification exactly
  • Dimensions 118.30 x 58.70 x 36.70mm ensure proper fit in radio housing
  • ISO9001, RoHS and CE certified with overcharge, over-discharge and short-circuit protection

Specifications

BrandFYIOGXG
ModelBattery For Tait
Part Number4894128144151
Specifications118.30 x 58.70 x 36.70
Typelithium_ion
Battery Pack118.30 x 58.70 x 36.70
Battery Typelithium_ion
Battery Capacity2600 milliamp_hours
Battery Voltage7.4 volts

Questions about this item

Will the 118.30 x 58.70 x 36.70 mm case fit the battery compartment of my Tait TP8100?

Yes, the pack matches the original 118.30 x 58.70 x 36.70 mm footprint and slides into the TP8100, TP8110, TP8115, TP8120, TP8135, TP8140, TP9300 and TP9400 radios without modification.

What is the step people skip when fitting the decoded chip battery?

After inserting the pack, power the radio on and let it sit for a few minutes so the firmware reads the new chip and calibrates the fuel gauge correctly.

When should I replace the 2600 mAh lithium-ion pack?

Replace it when run-time drops noticeably below the original 19.24 Wh rating or the radio shuts down early on a full charge.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.