Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00989969BTC
In stock
FYIOGXG Battery for PHV1210 PIVOT VAC 12V 1800mAh 21.6Wh
Replacement lithium-polymer battery delivering 12 V and 1800 mAh for PHV1210 PIVOT VAC cleaners
- Specifications91.20 x 86.80 x 42.50
- Typelithium_polymer
- Battery Pack91.20 x 86.80 x 42.50
- Battery Typelithium_polymer
- Battery Capacity1800.00 milliamp_hours
- Battery Voltage12.00 volts
- Compatible with PHV1210 and PIVOT VAC 12V models
- 1800 mAh capacity at 12 V delivers 21.6 Wh energy
- Lithium polymer chemistry with overcharge and short-circuit protection
- Exact-fit dimensions 91.20 x 86.80 x 42.50 mm
- ISO 9001 certified and tested to original specifications
Replacement Battery for PIVOT VAC
This 12.0 V lithium polymer pack replaces the original battery in PHV1210 and PIVOT VAC 12V devices. It matches part number 90557699 and delivers 1800 mAh capacity with a 21.6 Wh rating. The fully decoded chip works like the factory unit and requires no special tools for installation. Buyers who need a different voltage or a higher capacity pack cannot use this model.
Thermal Behaviour and Power Draw
The lithium polymer chemistry runs cool during normal vacuum operation and does not generate audible noise. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits to keep the cells stable. A fresh pack reaches its best runtime after two or three full charge cycles. Users who rely on continuous high-drain loads beyond the rated capacity will see reduced run time.
Build Integration and Compatibility
The pack measures 91.20 x 86.80 x 42.50 mm and weighs 450.0 g, fitting the original battery compartment without modification. It ships with shock-absorbing foam for safe transit and includes one lithium polymer cell. Only the original or equivalent 12 V charger should be used to avoid shortening cell life. Builders who need a different form factor or a multi-cell configuration must choose another battery.
Highlights
- Compatible with PHV1210 and PIVOT VAC 12V models
- 1800 mAh capacity at 12 V delivers 21.6 Wh energy
- Lithium polymer chemistry with overcharge and short-circuit protection
- Exact-fit dimensions 91.20 x 86.80 x 42.50 mm
- ISO 9001 certified and tested to original specifications
Specifications
| Brand | FYIOGXG |
|---|---|
| Model | Replacement for |
| Specifications | 91.20 x 86.80 x 42.50 |
| Type | lithium_polymer |
| Battery Pack | 91.20 x 86.80 x 42.50 |
| Battery Type | lithium_polymer |
| Battery Capacity | 1800.00 milliamp_hours |
| Battery Voltage | 12.00 volts |
Questions about this item
How do I install the FYIOGXG 12V 1800mAh battery into my PIVOT VAC and what step is often missed?
Remove the old pack, align the 91.20 x 86.80 x 42.50 mm case, and press the connector firmly until it clicks; the step most people miss is fully seating that connector.
What maintenance will this lithium polymer 1800mAh pack need over its life?
No scheduled maintenance is required; avoid low-quality chargers, store at room temperature, and run a full charge or discharge every few months if the vac sits unused.
What limit appears first during sustained use of this 21.6Wh battery?
Run time is limited by the 1800mAh capacity; expect the vac to stop when the pack reaches its low-voltage cutoff, then recharge before the next session.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
