We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White plastic in-hull transducer with 10-pin connector

FURUNO

FURUNO 527-IDIHD 50/200kHz 1kW In-Hull Transducer 10-Pin

SKU CH-PJ9T-FJE3G

An in-hull transducer delivering 1,000 watts at 50/200 kHz with 19/6 degree beam angles and a 10-pin connector

  • Speaker Sizesee title
  • 1 kW power for strong deep-water returns
  • Dual 50/200 kHz frequencies for versatile fish finding
  • In-hull mounting avoids through-hull installation
  • 19° and 6° beam angles balance coverage and detail
  • 10-pin connector fits compatible Furuno displays

50/200 kHz In-Hull Transducer

The Furuno 527-IDIHD is a broadband in-hull transducer rated at 1,000 watts. It operates on dual frequencies of 50 and 200 kHz with beam angles of 19 and 6 degrees. A plastic housing and 10-pin connector complete the assembly for compatible sounder modules.

Suited for solid fibreglass hulls

This unit targets owners who want depth and fish-finding performance without drilling through the hull. It suits trailerable or smaller craft where a through-hull fitting is impractical. Boats with cored, aluminium or steel hulls will not transmit sound effectively through this mounting method.

In-hull kit and diplexer included

The package supplies an M260 transducer element, an in-hull mounting kit and a built-in diplexer for the dual-frequency operation. These components let you bond the sensor inside the hull and split the 50 and 200 kHz signals to a single 10-pin cable. No separate fairing block or external hardware is required.

Highlights

  • 1 kW power for strong deep-water returns
  • Dual 50/200 kHz frequencies for versatile fish finding
  • In-hull mounting avoids through-hull installation
  • 19° and 6° beam angles balance coverage and detail
  • 10-pin connector fits compatible Furuno displays

Specifications

BrandFuruno
Speaker Sizesee title

Questions about this item

What display connector does the 10-pin plug on this 527-IDIHD transducer mate with?

The 10-pin connector is designed for compatible Furuno fish-finder displays that accept a 10-pin transducer interface.

Will the 19-degree and 6-degree beam angles still give clear bottom returns if I keep my existing 50/200 kHz sounder module?

Yes, the transducer operates at the same 50/200 kHz frequencies with 19/6 degree beam angles, so it works with existing sounder modules that support those frequencies.

How can I confirm the 1 kW Broadband transducer is transmitting correctly after the in-hull installation?

Run the sounder in simulation or live mode and verify strong bottom echoes at both 50 kHz and 200 kHz with consistent depth readings and clear target separation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.