We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular electronic ballast in grey plastic housing with terminal connections

Fulham

Fulham SC-120-213-LT5 24-33W 1-2 lamp ballast

SKU CH-Q93M-PYRTQ

Electronic fluorescent ballast powers one or two T5 or T8 lamps from 13 W to 21 W on 120 V AC

  • Typeballast
  • Weight0.55
  • Electronic ballast for efficient fluorescent operation
  • Supports one or two T5 or T8 lamps
  • Handles 13, 14, 15 and 21 watt bulbs
  • Operates on standard 120V AC input
  • Lightweight design at 0.55 weight units

What this ballast does

The Fulham SC-120-213-LT5 is an electronic fluorescent ballast designed to operate one or two T5 or T8 lamps. It accepts 120V AC input and supports bulb wattages of 13, 14, 15 and 21 watts within a 24 to 33 watt operating range.

Build and connections

Weighing 0.55 units, the unit uses a rapid-start method with no dimming capability. The fixed output suits installations where consistent light levels are required and no dimming control wiring is present.

Check before ordering

Verify that your fixture uses T5 or T8 lamps rated at 13, 14, 15 or 21 watts and that the supply voltage is 120V AC. Buyers needing dimming control or support for other bulb types or voltages will need a different ballast.

Highlights

  • Electronic ballast for efficient fluorescent operation
  • Supports one or two T5 or T8 lamps
  • Handles 13, 14, 15 and 21 watt bulbs
  • Operates on standard 120V AC input
  • Lightweight design at 0.55 weight units

Specifications

BrandFULHAM
Typeballast
Weight0.55

Questions about this item

What input voltage does the 120V AC electronic ballast require?

The ballast operates on a 120V AC supply and supports one or two lamps with a combined output range of 24 to 33 watts.

What lamp types and physical dimensions suit the SC-120-213-LT5 housing?

It drives T5 or T8 fluorescent tubes rated 13, 14, 15 or 21 watts each; the unit weighs 0.55 lb and fits standard fluorescent fixture channels.

How is the rapid-start ballast wired, and what mistake should be avoided?

Connect the 120V AC input to the labelled primary leads and the lamp sockets to the secondary leads matching the tube count; a common error is reversing the lamp leads on two-lamp fixtures, which prevents ignition.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.