Fulham
Fulham Firehorse Exit Lighting LED Exit Sign Combo FHEC30WR dlp replacement lamp
LED exit sign with dual emergency lamp heads, red lettering, selectable directional chevrons and nickel-cadmium battery backup for 120/277 V operation
- LED exit sign with emergency lighting for code compliance
- Universal field-selectable chevrons adapt to any layout
- Dual 120/277 V operation fits standard circuits
- Nickel-cadmium battery backs the sign during outages
- White plastic housing with red letters for clear visibility
Exit Sign Combo with Emergency Lights
The Fulham Firehorse FHEC30WR is a combination exit sign and emergency lighting unit intended for commercial and institutional buildings. It provides illuminated exit lettering in red alongside two integrated lamp heads that activate during a power loss. The housing is constructed from white plastic and supports single or double face mounting with field selectable directional chevrons.
Universal Voltage Input and Plastic Housing
The unit operates on a dual voltage supply of 120 or 277 volts, allowing installation on standard North American lighting circuits without a separate transformer. Its plastic enclosure keeps weight low and simplifies surface mounting on walls or ceilings. The nickel cadmium battery chemistry supplies backup power to both the exit legend and the two emergency heads when mains voltage is interrupted.
LED Light Source and Battery Backup
LED illumination serves both the exit face and the emergency lamp heads, drawing minimal power during normal operation while maintaining code required brightness during an outage. The nickel cadmium battery recharges automatically when mains power is present and is rated for the expected service life of the fixture. A California Proposition 65 warning applies because the product contains chemicals identified by the state as causing cancer and reproductive harm.
Highlights
- LED exit sign with emergency lighting for code compliance
- Universal field-selectable chevrons adapt to any layout
- Dual 120/277 V operation fits standard circuits
- Nickel-cadmium battery backs the sign during outages
- White plastic housing with red letters for clear visibility
Specifications
| Brand | FULHAM FIREHORSE EXIT LIGHTING |
|---|
Questions about this item
Does the FHEC30WR operate on a 120/277 V supply?
Yes, the exit sign combo is rated for dual-voltage 120/277 V input, so it connects directly to either North American line voltage without a separate transformer.
What mounting provisions does the plastic housing include?
The white plastic housing is designed for universal surface or recessed installation with field-selectable chevron indicators that snap into place for single- or double-face configurations.
How is the nickel-cadmium battery connected during installation?
After securing the housing, plug the battery harness into the PCB before closing the cover; the most common error is leaving the quick-disconnect unseated, which prevents emergency operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



