We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Charcoal silver half-frame camera with rose pink Instax printer and soft case

FUJIFILM

FUJIFILM X half Charcoal Silver with MINI LINK 3 Rose Pink

SKU CH-TX6X-YZQ3T

A vertical 1" 18MP sensor creates 3:4 stills and video for social-ready stories, while Film Camera Mode locks a single Film Simulation across 36, 54.

  • TypeMirrorless
  • ColorGraphite
  • Vertical 1" 18MP sensor captures ready-to-share 3:4 content without cropping
  • Film Camera Mode locks one Film Simulation per 36, 54, or 72-shot roll for deliberate shooting
  • 13 iconic Film Simulations plus 26 creative filters including Light Leak and Halation
  • Fixed 10.8 mm f/2.8 lens (32mm equivalent) with manual aperture and focus rings
  • Bundled INSTAX MINI LINK 3 printer, soft case, card reader and 64GB memory card

Reimagined Half-Frame Format

The FUJIFILM X half uses a vertical 1 inch 18MP sensor with a 3:4 aspect ratio. This layout creates a distinct shooting experience for casual photographers and content creators. It suits vertical storytelling and social sharing without cropping. The fixed 10.8 mm f/2.8 lens provides a 32mm equivalent field of view.

Thermals Noise and Power

The compact mirrorless body operates silently during typical use. No active cooling system is present in the specifications. Power is supplied via USB-C connectivity for charging and data transfer. Normal shooting sessions produce negligible heat from the 1 inch sensor.

Film Camera Mode Discipline

Film Camera Mode locks one Film Simulation per roll of 36, 54, or 72 shots. Images remain hidden until digital development via app or desktop. A contact sheet is generated automatically at the end. This workflow suits creators who want deliberate, film-style intent. It is not for photographers who require instant review or unlimited bursts.

Highlights

  • Vertical 1" 18MP sensor captures ready-to-share 3:4 content without cropping
  • Film Camera Mode locks one Film Simulation per 36, 54, or 72-shot roll for deliberate shooting
  • 13 iconic Film Simulations plus 26 creative filters including Light Leak and Halation
  • Fixed 10.8 mm f/2.8 lens (32mm equivalent) with manual aperture and focus rings
  • Bundled INSTAX MINI LINK 3 printer, soft case, card reader and 64GB memory card

Specifications

BrandFUJIFILM
TypeMirrorless
ColorGraphite

Questions about this item

How do I attach the soft case and the strap lugs on the FUJIFILM X half without blocking the sub-LCD film window?

Slide the soft case over the body so the cut-out aligns with the secondary sub-LCD on the rear; then thread the strap through the two lugs on the left and right edges — the lugs sit above the case, so the window stays visible and the Frame Advance Lever moves freely.

When will I need to replace the battery or clean the sensor on this camera?

The internal battery is recharged via USB-C; expect to recharge after roughly one full 72-shot roll. Sensor cleaning is rarely needed because the fixed 10.8 mm f/2.8 lens stays mounted, but if dust appears, use a blower with the camera facing down — no wet swabs.

How many frames can I shoot in a single session before the Film Camera Mode forces a digital development pause?

The longest roll setting is 72 frames; once you reach that limit the camera locks the shutter until you connect to the app or desktop to develop the roll and generate the contact sheet.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.