Frostguard
Frostguard FG1-12P Electric Heating Cable 12 ft 120V 72W
12-foot 120 V electric heating cable delivers 72 W via conductive carbon core with rubberised polymer shielding for indoor or outdoor pipe protection
- 12 ft self-regulating cable prevents frozen pipes
- 72 W output delivers reliable heat at 120 V AC
- conductive carbon core adjusts power with temperature
- rubberized polymer shielding resists moisture indoors and outdoors
- compatible with H903, H913, H914 and H915 thermostats
Frostguard 12 ft Electric Heating Cable
The Frostguard FG1-12P is a 12-foot electric heating cable rated for 120 V AC and 72 W output. It uses a conductive carbon core wrapped in a rubberized polymer shield for indoor or outdoor pipe and surface freeze protection.
Rubberized polymer shield and carbon conductor
The cable measures 7/16 in wide and operates at 50 Hz on a single phase without a built-in thermostat. It is designed to connect with H903, H913, H914 or H915 control accessories for temperature regulation in residential or light-commercial settings.
Replaces basic heat tape without integrated controls
Builders who need a separate thermostat or controller will appreciate the modular design, while those wanting an all-in-one plug-and-play kit should look for a model that includes the thermostat in the box.
Highlights
- 12 ft self-regulating cable prevents frozen pipes
- 72 W output delivers reliable heat at 120 V AC
- conductive carbon core adjusts power with temperature
- rubberized polymer shielding resists moisture indoors and outdoors
- compatible with H903, H913, H914 and H915 thermostats
Specifications
| Brand | RAYCHEM |
|---|
Questions about this item
What voltage and wattage does the 12 ft FG1-12P heating cable draw?
It operates on 120 V AC and delivers 72 W of heat output across the full 12 ft length.
What mounting hardware works with the 7/16 in wide FG1-12P cable?
The cable is designed for use with RAYCHEM H903, H913, H914 and H915 connection kits, which provide the required end seals and power connections.
How do you install the FG1-12P cable and what step is often missed?
Lay the cable on the surface, secure it with approved tape or clips, then fit the H903/H913/H914/H915 end seal and power connection — skipping the proper end seal is the common mistake that lets moisture in.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



