Freeman
Freeman 15 gauge 1.5 in 34° finish nails 1000 count pneumatic accessory
15 gauge 34° finish nails, 1.5 in, glue collated, 1000 count for trim and molding work
- TypePneumatic Nails & Staples
- 15 gauge finish nails for trim work
- 34 degree angle fits compatible pneumatic nailers
- 5 inch length suits moldings and baseboards
- Glue collated strips feed reliably in 1000 count pack
Freeman 15 gauge finish nails
These 15 gauge pneumatic nails measure 1.5 inches with a 34 degree angle and come in a 1000 count pack. They are solid steel for durability and glue collated for reliable feeding. Designed for trim work such as shoe moldings crown moldings chair railing window casing and baseboards.
Installation notes
Load the collated strip into a compatible 15 gauge 34 degree finish nailer following the tool manufacturer's instructions. Ensure the air pressure is set correctly for the material thickness to avoid overdriving or jamming. Using the wrong gauge or angle nail will cause feed problems and may damage the tool. Not for framers who need longer nails or higher volume coils.
Highlights
- 15 gauge finish nails for trim work
- 34 degree angle fits compatible pneumatic nailers
- 5 inch length suits moldings and baseboards
- Glue collated strips feed reliably in 1000 count pack
Specifications
| Type | Pneumatic Nails & Staples |
|---|
Questions about this item
How can I verify the 15 gauge 34° finish nails are feeding correctly after loading the strip?
Fire a few test nails into scrap wood; the 1.5 in length should sink flush and the glue-collated strip must advance without jamming.
What comes in the box and is any other hardware needed to use the nails?
The pack contains 1000 glue-collated 15 gauge 34° finish nails; a compatible pneumatic nailer is required and sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
