Fostoria
Fostoria 64337-030 Electric Infrared Heater Panel Emitter 29in 480VAC 4300W HVAC Control
Electric infrared heater panel emitter delivering 4300 W at 480 V AC with 29 in length, 12 in width, 6 in depth, 5.2 A or 8.9 A draw, single or three-phase, black quartz cloth element, steel frame.
- 480 V AC power suits industrial three-phase supply
- 4,300 W output heats large zones quickly
- 29 in panel covers wide area with infrared warmth
- Black quartz cloth emitter resists high-temperature cycling
- ETL listed for US and Canada safety compliance
Industrial Infrared Emitter 4300W 480VAC
The Fostoria 64337-030 is an electric infrared heater panel emitter built for industrial and commercial HVAC systems. It delivers 4,300 watts of radiant heat at 480 volts AC and is designed to work with CH-648-3A and CH-648-3C control models. This unit suits facilities that require focused, high-output heating without forced air.
Black Quartz Cloth Element Steel Frame
The emitter uses a black quartz cloth element bonded with cement to a refractory board and resistance wire, all housed in a steel frame. It measures 29 inches long, 12 inches wide and 6 inches deep. The package includes the element panel assembly, a heater housing guard and mounting hardware for fixed installation. The construction is rated for one- or three-phase supply at 5.2 or 8.9 amps.
Verify Voltage Phase And Control Compatibility
Before ordering, confirm that your supply is 480 volts AC and that you can provide either single- or three-phase power at the stated amperage. Ensure the existing control system matches the CH-648-3A or CH-648-3C models specified by the manufacturer. Check that the 29-inch length and 12-inch width fit the intended mounting location and that local codes accept ETL-listed equipment.
Highlights
- 480 V AC power suits industrial three-phase supply
- 4,300 W output heats large zones quickly
- 29 in panel covers wide area with infrared warmth
- Black quartz cloth emitter resists high-temperature cycling
- ETL listed for US and Canada safety compliance
Specifications
| Brand | FOSTORIA |
|---|
Questions about this item
What voltage and phase options does the 480V AC heater panel support?
The panel runs on 480V AC and is rated for either 1 or 3 phase operation.
What are the overall dimensions and mounting requirements for the 29 inch emitter?
It measures 29 in long, 12 in wide and 6 in deep with a steel frame and included mounting hardware.
How is the element panel assembly installed and what common step is missed?
Mount the housing guard, secure the panel with the supplied hardware, then wire the 5.2A or 8.9A supply per the CH-648-3A or CH-648-3C controller instructions; the step often missed is confirming the phase setting matches the supply.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
