We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two white in-wall timer switches with illuminated buttons and wall plates

Fosmon HD8213 electrical timer switch 2-pack

SKU CH-5SZH-PAYFT MPN HD8213

A two-pack of in-wall countdown timers with nine pre-set intervals from five minutes to four hours for fans, heaters and lights

  • TypeWall Mount, Screw
  • Voltage12
  • Amps15
  • Compatibility/FitmentBathroom vent fans, Night/security lights, Heaters, Regular
  • Pole ConfigurationScrew
  • Horsepower1875 watts
  • Nine pre-set countdown options from 5 minutes to 4 hours
  • Illuminated button and red LED indicator visible in darkness
  • IP54 rated enclosure suits bathroom vent fans and heaters
  • UL listed with ground wire for 15 A 1875 W loads
  • Two switches and two wall plates included for multi-room install

2-Pack In-Wall Timer Switch

The Fosmon HD8213 two-pack provides programmable countdown control for bathroom vent fans, heaters and security lights. Each unit fits a standard single-gang wall box and requires a neutral wire for operation. The 15 A, 125 V rating supports loads up to 1875 W. ETL certification confirms compliance with North American safety standards.

Installation with Neutral Wire

Wiring uses screw terminals and the included mounting screws (0.748 in) secure the device to the wall box. One wall plate is supplied per timer, so multi-gang installations need additional plates. The neutral wire requirement means the switch cannot replace a two-wire loop without pulling a neutral conductor. MOSFET switching eliminates mechanical relay click.

Sustained Load Behaviour

The 15 A continuous rating handles bathroom fans and resistive heaters at full 1875 W without derating. IP54 enclosure protects the electronics from moisture during long steam cycles. Illuminated button and red LED programme indicator remain visible throughout extended runs. MOSFET output runs cooler than electromechanical alternatives under continuous duty.

Highlights

  • Nine pre-set countdown options from 5 minutes to 4 hours
  • Illuminated button and red LED indicator visible in darkness
  • IP54 rated enclosure suits bathroom vent fans and heaters
  • UL listed with ground wire for 15 A 1875 W loads
  • Two switches and two wall plates included for multi-room install

Specifications

TypeWall Mount, Screw
Voltage12
Amps15
Compatibility/FitmentBathroom vent fans, Night/security lights, Heaters, Regular light/fan switches
Pole ConfigurationScrew
Horsepower1875 watts
Watts1875 watts
Number of ReceptaclesHD8213
Receptacle Type15 amps, 125 volts
Size/Dimensions114 mm x 69 mm x 42 mm
Color/FinishIn Wall Neutral 2 Pack
StyleScrew
Switch TypeMOSFET
Number of Poles1-way
Contact Form1-way
Enclosure TypeIP54, Wall Mount
Input Voltage125 volts
MountingWall Mount
FeaturesBathroom vent fans, Night/security lights, Heaters, Regular light/fan switches
BrandFosmon
ModelHD8213
Item Count12 pack
Commercial/ResidentialBathroom vent fans, Night/security lights, Heaters, Regular light/fan switches
Part NumberHD8213

Questions about this item

How can I confirm the Fosmon HD8213 timer is running a countdown after installation?

The push button stays illuminated in light blue and the red LED program indicator remains on until the selected countdown finishes, so you can see the active program at a glance.

What hardware is included in the 2-pack and what must I supply myself?

The box contains two in-wall timer switches, two wall plates, four 0.748 in. mounting screws for the wall box and four mounting screws for the switch; you only need to provide a screwdriver.

Which timing option should I select for a bathroom exhaust fan versus an overnight security light?

Choose one of the shorter presets such as 5, 10, 15, 20 or 30 minutes for the fan, and use the 1, 2 or 4 hour settings for lights that need to stay on longer.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.