We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 16AWG 12VHPWR male to four 8-pin female PCIe 5.0 extension cable with three cable combs

FormulaMod

FormulaMod 16AWG 12VHPWR to 4x8Pin PCIe 5.0 Extension Cable 17.7in Blue

SKU CH-Q77Y-DE07N

A 17.7-inch 16AWG extension cable converts a single 12VHPWR 12+4 pin GPU connector into four 8-pin PCIe 5.0 plugs for RTX 4090, 4080, 4070 and 3090 cards

Color Blue

  • Extends GPU power reach with 17.7 inch length
  • 16AWG tinned copper wire delivers stable current
  • Nylon braided jacket protects against daily wear
  • Three cable combs enable tidy routing
  • 12VHPWR to four 8-pin adapters support RTX 4090 4080 4070 3090

FormulaMod 12VHPWR Extension Cable

This FormulaMod 16AWG extension cable connects a 12VHPWR male connector to four 8-pin female connectors, adding 17.7 inches of reach for RTX 4090, 4080, 4070 and 3090 graphics cards. It is designed for builders who need to route power around large coolers or through tight routing channels. The cable is not a PSU replacement and must plug into an existing modular 8-pin cable set. Buyers without modular 8-pin cables on their power supply cannot use this product.

Check PSU Modular Ports and Cable Layout

Verify that your power supply provides enough modular 8-pin PCIe ports to feed the four female connectors on this extension. Confirm the GPU requires a 12VHPWR (12+4) input and that the existing PSU cables are long enough to reach the extension once it is routed. The extension adds fixed length, so measure the path from PSU to GPU to avoid tension or sharp bends. Systems with non-modular PSUs or insufficient 8-pin outputs are not compatible.

Thermals Noise and Power Handling

The 16AWG tinned copper conductors are rated for the high current draw of PCIe 5.0 12VHPWR connections, maintaining stable delivery under load. A durable nylon braided jacket resists abrasion and heat from nearby components, while three included cable combs keep the four leads aligned for consistent airflow. The pre-bent, ultra-soft construction reduces strain on the GPU connector, helping prevent hotspot formation during sustained gaming or compute workloads.

Highlights

  • Extends GPU power reach with 17.7 inch length
  • 16AWG tinned copper wire delivers stable current
  • Nylon braided jacket protects against daily wear
  • Three cable combs enable tidy routing
  • 12VHPWR to four 8-pin adapters support RTX 4090 4080 4070 3090

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What connectors are included on the extension cable and is a PSU cable supplied?

The cable has a 16 (12+4) pin male connector on one end and four 8 (7+1) pin female connectors on the other. It is an extension only; you must use your existing PSU modular cables.

Which GPUs does the 12VHPWR connector support?

The 12VHPWR connector is designed for RTX 4090, 4080, 4070 and 3090 Ti graphics cards that use the 16-pin PCIe 5.0 power interface.

How does the 17.7 inch length affect cable routing in a typical build?

The 17.7 inch extension adds reach from your PSU cables to the GPU, and the three included combs help keep the four 8-pin branches neatly aligned.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.