FOCUSTEC
FOCUSTEC CMOS RTC Battery CR2032CL-23-2 for Alienware Alpha R1 Steam Machine
Replaces the CMOS battery in Alienware Alpha R1 Steam Machines to resolve the flashing yellow light issue
- Battery TypeLithium-Ion
- Fixes the flashing yellow light on Alienware Alpha R1
- Direct replacement for CR2032CL-23-2 in Steam Machine models ASM100 to ASM100-6980BLK
- Installs in about 10 minutes with a 2-pin connector
- Lithium-ion cell restores CMOS settings and system time
- Compact unit fits tight motherboard spaces in Alpha R1
Alienware Alpha R1 CMOS Replacement
This lithium-ion CR2032CL-23-2 battery replaces the original CMOS cell in Alienware Alpha R1 Steam Machine models ASM100, ASM100-980, ASM100-1580, ASM1002980BLK, ASM100-4980BLK and ASM100-6980BLK. It restores real-time clock and BIOS settings when the original battery fails. The two-pin connector matches the motherboard header for direct fitment.
Thermals Noise and Power Draw
As a passive coin cell the battery generates no heat and produces zero acoustic noise during normal operation. It supplies a steady 3 V to the CMOS circuitry with negligible current draw. No active cooling or power management is required once installed.
Build Quality and Connector Implications
The compact assembly uses a two-wire lead ending in a two-pin plug that seats directly on the board. Installation typically takes around 10 minutes and may require a subsequent NVRAM reset via the motherboard jumper. A full motherboard reset is also necessary after fitting to resolve the flashing yellow light indicator. Buyers whose systems use a different pin pitch or wire length should verify compatibility before ordering.
Highlights
- Fixes the flashing yellow light on Alienware Alpha R1
- Direct replacement for CR2032CL-23-2 in Steam Machine models ASM100 to ASM100-6980BLK
- Installs in about 10 minutes with a 2-pin connector
- Lithium-ion cell restores CMOS settings and system time
- Compact unit fits tight motherboard spaces in Alpha R1
Specifications
| Battery Type | Lithium-Ion |
|---|
Questions about this item
How do I install the CR2032CL-23-2 battery in my Alienware Alpha R1 and what step do people often miss?
Installation takes about 10 minutes; after fitting the 2-pin connector you must perform a full motherboard reset and possibly an NVRAM jumper reset to clear the yellow light.
When will this CMOS battery need replacement again?
The lithium-ion CR2032CL-23-2 cell typically lasts several years; replace it when the system clock drifts or the flashing yellow light returns.
What is the first limitation that appears under sustained use?
The 3 V lithium-ion cell gradually loses capacity, eventually causing the RTC to fail and the yellow-light error to reappear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



