We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver rackmount box with Thunderbolt and dual Ethernet ports

Focusrite

Focusrite RedNet TNX Dante Interface

SKU CH-X74E-GNEC1

Portable Dante interface delivering 128x128 channels at 24-bit/192 kHz over Thunderbolt 3 with AES67 and SMPTE ST 2110 support

  • 128×128 channels at 24-bit / 192 kHz for massive sessions
  • Optional 256×256 channel upgrade at 24-bit / 96 kHz scales further
  • Ultralow round-trip latency keeps monitoring tight
  • Dual Ethernet ports with redundancy protect live workflows
  • AES67 and SMPTE ST 2110 support integrates with broadcast standards

Portable Dante Interface

The Focusrite RedNet TNX is a portable Dante interface delivering 128x128 channels of uncompressed audio at 24-bit / 192 kHz over a single Thunderbolt 3 connection. It supports AES67 interoperability and SMPTE ST 2110 compliance for professional workflows. Dual Ethernet ports provide primary and secondary network redundancy for mission-critical reliability. Configuration and routing are managed centrally through RedNet Control software.

Studios Needing Redundant High-Channel Networking

This unit suits commercial studios, post-production houses, and broadcast teams requiring scalable, high-resolution audio networking with redundant Ethernet paths. It fits Dolby Atmos postproduction and large recording sessions where ultralow round-trip latency is essential. Buyers who need more than 128x128 channels without purchasing an optional upgrade should look elsewhere. Users without Thunderbolt 3 ports on their host computer cannot connect this interface.

128x128 Channels at 192 kHz With Upgrade Path

The interface comfortably handles 128 input and 128 output channels at 24-bit / 192 kHz for immersive formats like Dolby Atmos. An optional Dante Ready upgrade expands capacity to 256x256 channels at 24-bit / 96 kHz for larger productions. At native 192 kHz operation the channel count remains fixed at 128x128. Systems requiring 256 channels at 192 kHz exceed the capabilities of this hardware.

Highlights

  • 128×128 channels at 24-bit / 192 kHz for massive sessions
  • Optional 256×256 channel upgrade at 24-bit / 96 kHz scales further
  • Ultralow round-trip latency keeps monitoring tight
  • Dual Ethernet ports with redundancy protect live workflows
  • AES67 and SMPTE ST 2110 support integrates with broadcast standards

Specifications

No published specifications for this item yet.

Questions about this item

What Thunderbolt version must my computer support for the RedNet TNX to operate?

The interface requires a Thunderbolt 3 port on the host computer to deliver 128x128 channels at 24-bit / 192 kHz with ultralow round-trip latency.

Will the RedNet TNX integrate with my existing AES67 or SMPTE ST 2110 equipment?

Yes, the unit supports both AES67 interoperability and SMPTE ST 2110 compliance, so it can coexist with older AoIP gear that uses those standards.

How can I verify the RedNet TNX is passing audio at the full 128x128 channel count after setup?

Open RedNet Control software and confirm the Dante routing matrix shows 128 active transmit and 128 active receive channels at 24-bit / 192 kHz.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.