We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black and red Fluke test probes with pointed tips

Fluke

Fluke TP4 Test Probes 10A 1000V Black Red

SKU CH-XEGT-F7F1V

Test probe set rated 10 A and 1,000 V for use with Fluke 107, 175, 177, 179, 287, 289, 705, 707, 712, 787, 789, 83V, 87V and T5 models

  • TypeAssortments & Kits
  • Rated for 1000 V CAT II safety
  • Handles up to 10 A continuous current
  • Compatible with Fluke 87V and 179 multimeters
  • Black and red probes for clear polarity
  • Suits handheld and hands-free measurement tasks

Compatible Fluke Meters

These test probes work with Fluke 107, 175, 177, 179, 287, 289, 705, 707Ex, 712, 787, 787B, 789, 83V, 87V, T5-1000, T5-600 and TL20 models. They are intended for technicians who need replacement leads for supported handheld meters. The black and red pair covers standard polarity identification.

Rating Upgrade From Lower Limits

Probes rated for 10 A and 1000 V replace leads that only meet CAT II 600 V or lower current limits. The jump is worth it when measurements approach the meter’s full 1000 V AC/DC capability or when 10 A circuits are tested regularly. Older or generic leads without the CAT II 1000 V rating should be swapped out for safety compliance.

Check Meter Model Before Ordering

Verify that your meter appears in the supported list above; other Fluke models or non-Fluke brands are not confirmed compatible. Ensure the instrument’s safety category and voltage rating match the probe’s CAT II 1000 V specification. Do not use these probes on circuits exceeding the stated 10 A or 1000 V limits.

Highlights

  • Rated for 1000 V CAT II safety
  • Handles up to 10 A continuous current
  • Compatible with Fluke 87V and 179 multimeters
  • Black and red probes for clear polarity
  • Suits handheld and hands-free measurement tasks

Specifications

BrandFLUKE
TypeAssortments & Kits

Questions about this item

What Fluke meters accept the 4 mm banana plugs on these TP4 probes?

They fit the Fluke 107, 175, 177, 179, 287, 289, 705, 707Ex, 712 RTD, 787, 787B, 789, 83V, 87V, T5-600, T5-1000 and TL20.

How do I connect the probes for a safe CAT II 1000 V measurement?

Insert the black probe into the COM jack and the red probe into the V/Ω jack, then verify the meter is set to the correct function before touching the test points.

When should I replace the probe tips on the TP4 set?

Replace them when the stainless-steel tips become pitted, bent or no longer make solid contact, which can cause intermittent readings at 10 A or 1000 V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.