We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fluke TL81A test lead kit with three colour-coded leads, low-leakage probes and alligator clips up to 26mm jaw opening

Fluke

Fluke TL81A Deluxe Test Lead Kit 2.6m 26mm jaw

SKU CH-M7J4-S8TZD

Deluxe test lead kit with three colour-coded leads, matching alligator clips, 2.6 m length and 26 mm jaw opening for SMD and general electronics testing

  • Complete test kit with three colour-coded leads and matching alligator clips
  • 6 metre cable length gives generous reach across the workbench
  • 26 mm jaw opening on clips grips a wide range of terminals
  • Low-leakage probes ensure accurate high-resistance readings
  • Designed as the direct replacement lead set for the 1550B MegaohmMeter

Test Lead Kit for Fluke 1550B MegaohmMeter

The Fluke TL81A Deluxe Test Lead Kit provides a complete replacement lead set designed specifically for the Fluke 1550B MegaohmMeter. It includes three colour-coded test leads in red, black and green fitted with low-leakage probes for reliable insulation resistance measurements.

2.6m Leads with 26mm Jaw Opening

Each lead measures 2.6 metres, giving ample reach for bench or field work while the alligator clips open to 26mm for secure attachment to large terminals or bus bars. The length suits most switchgear and motor testing scenarios, though very long cable runs or confined panels may require shorter leads.

Low-Leakage Probes and Colour-Coded Clips

Spring-loaded sharp tips on the probes maximise contact with small test points, reducing leakage current that can distort high-resistance readings. The matching red, black and green alligator clips and leads simplify phase identification and help prevent connection errors during repetitive tests.

Highlights

  • Complete test kit with three colour-coded leads and matching alligator clips
  • 6 metre cable length gives generous reach across the workbench
  • 26 mm jaw opening on clips grips a wide range of terminals
  • Low-leakage probes ensure accurate high-resistance readings
  • Designed as the direct replacement lead set for the 1550B MegaohmMeter

Specifications

No published specifications for this item yet.

Questions about this item

Will the 2.6m leads reach test points on a Fluke 1550B MegaohmMeter without strain?

The 2.6m lead length provides ample reach for bench-top use with the 1550B MegaohmMeter, letting you position the meter and the device under test comfortably.

How can I confirm the low-leakage probes are making proper contact on SMD pads?

The spring-loaded sharp tips on the precision probes give tactile feedback when they seat on small SMD test points, and a stable resistance reading on the meter confirms good contact.

Does the kit include the micro-grabbers and mini alligator clips shown in the description, or must they be purchased separately?

The deluxe kit ships with micro-grabbers, mini alligator clips, standard alligator clips with 26mm jaw opening, and three colour-coded leads, so no extra accessories are required for typical SMD work.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.