We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow handheld electrical tester with digital display, OpenJaw clamp and stored probes

Fluke

Fluke T5-600 Electrical Voltage Continuity Current Tester

SKU CH-EQ9N-G0TVV

Compact tester measures voltage, continuity and current up to 100 A with OpenJaw technology and a 10-foot drop rating

  • Measures AC and DC voltage automatically with precise digital resolution
  • Checks current up to 100 A using OpenJaw technology without breaking the circuit
  • Displays resistance readings up to 1000 ohms for quick continuity verification
  • Audible continuity beeper gives instant pass/fail indication during wiring checks
  • Survives a 3 m drop and stores probes neatly for rugged daily use

Compact tester for voltage, continuity and current

The Fluke T5-600 combines AC and DC voltage measurement, resistance up to 1000 ohms and continuity testing in one hand-held tool. OpenJaw technology measures current up to 100 A without breaking the circuit. Detachable SlimReach probes and stowable leads suit electricians and technicians who need a single device for everyday electrical verification.

Thermals, noise and power draw in normal use

The tester draws power only from the circuit under test, so it adds no heat or audible noise to the workspace. Its rugged housing survives a 10-foot drop, and the compact form factor keeps probe tips protected during transport. No internal fan or active cooling is present, making operation silent in residential and commercial environments.

Behaviour under sustained load

Continuous current readings up to 100 A remain stable because the OpenJaw sensor does not require circuit interruption. The 600 V rating covers standard low-voltage panels without overheating the instrument. Resistance and continuity functions respond instantly during extended troubleshooting sessions, and the detachable probes maintain consistent contact on repeated measurements.

Highlights

  • Measures AC and DC voltage automatically with precise digital resolution
  • Checks current up to 100 A using OpenJaw technology without breaking the circuit
  • Displays resistance readings up to 1000 ohms for quick continuity verification
  • Audible continuity beeper gives instant pass/fail indication during wiring checks
  • Survives a 3 m drop and stores probes neatly for rugged daily use

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the SlimReach probes so they meet the 600 V rating?

Align each probe with the tester's input jacks and push until the latch clicks; the detachable tips are keyed for national standards and only lock when fully seated.

What part will need replacement after repeated use on live circuits?

The detachable SlimReach probe tips wear from contact resistance and should be swapped when the continuity beeper becomes intermittent.

At what current level does the OpenJaw measurement stop reading accurately during a long session?

The OpenJaw clamp is specified to 100 A; sustained loads near that limit can cause thermal drift before the tester auto-ranges.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.