Fluke
Fluke T5-1000 1000V AC/DC Voltage Continuity Current Tester
Measures AC/DC voltage up to 1000V and current with OpenJaw, plus continuity beeper and rugged drop-proof build
- Auto-selects AC or DC voltage up to 1000V for faster troubleshooting
- OpenJaw design measures AC current up to 100A without breaking the circuit
- Continuity beeper gives instant audible confirmation of closed circuits
- Survives a 3m drop for reliable performance on tough job sites
- Detachable SlimReach probe tips meet national electrical standards for safe connections
Fluke T5-1000 Tester for Electricians
The Fluke T5-1000 is a compact voltage, continuity and current tester built for electricians and maintenance technicians. It automatically selects between AC and DC voltage up to 1000 V and features an OpenJaw design for non-invasive current measurement. A beeper signals continuity, while detachable SlimReach probe tips meet national electrical standards. Rugged construction withstands a 10-foot drop.
Installation and Common Issues
No software installation is required; the tester is ready to use once the supplied battery is fitted. The detachable probe tips snap into the body for neat storage and accept Fluke accessory test clips. The most common issue is forgetting to enable the beeper for continuity checks or allowing the auto-off mode to shut the unit down during extended testing sessions.
Pre-Purchase Setup Checks
Verify that the circuits you intend to test fall within the 1000 V AC/DC rating of this model; a 600 V version is also available if your work never exceeds that level. Confirm that your test leads and any accessory clips are compatible with the SlimReach probe tips. Ensure you have a spare battery on hand for the auto-off function to conserve power during long jobs.
Highlights
- Auto-selects AC or DC voltage up to 1000V for faster troubleshooting
- OpenJaw design measures AC current up to 100A without breaking the circuit
- Continuity beeper gives instant audible confirmation of closed circuits
- Survives a 3m drop for reliable performance on tough job sites
- Detachable SlimReach probe tips meet national electrical standards for safe connections
Specifications
No published specifications for this item yet.
Questions about this item
How do I verify the Fluke T5-1000 is working correctly after setup?
Select voltage mode and measure a known live circuit up to 1000V; the display should show the reading. For continuity, touch the probes together — the beeper sounds if the path is complete. Use the OpenJaw on a known current-carrying conductor up to 100A to confirm current measurement.
What comes in the box with the Fluke T5-1000 and what must I buy separately?
The tester includes detachable SlimReach probe tips and has built-in probe storage. Test leads accept Fluke accessory test clips, which are sold separately if needed.
Should I choose the 600V or 1000V model of the Fluke T5-1000 for my application?
Choose the 1000V model when circuits may reach up to 1000V AC/DC; the 600V model is rated for lower voltage systems only. Both share the same OpenJaw current capability and continuity beeper.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
