We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow single-mode fiber patch cord with SC connectors on both ends, coiled

FLUKE networks

FLUKE networks SMC-9-SCSC 9/125 µm SC/SC 524.9 ft measurement tool

SKU CH-4QR4-TAKZE MPN SMC-9-SCSC

Single-mode 9/125 µm fiber patch cord with SC male connectors on both ends, 524.9 ft long for Fluke OptiFiber Pro and DTX-1800 OTDR testing

  • TypeConsumer Electronics
  • Single-mode 9/125 µm fiber for long-distance links
  • 9 ft length suits extended cable runs
  • SC/SC male connectors mate with standard patch panels
  • Compatible with Fluke OptiFiber Pro and DTX-1800 OTDR
  • 90-day limited warranty covers manufacturing defects

Single-mode fibre patch cord

This single-mode patch cord uses a 9/125 µm core/cladding diameter and extends to 524.9 ft with SC male connectors on both ends. It is built for network technicians who need a long reference lead when certifying or troubleshooting fibre links.

OTDR launch-cable constraint

The 524.9 ft length sets a practical minimum distance before the OTDR can measure events beyond the launch-cable dead zone. Shorter fibres under test may fall inside this blind spot, so the cord is unsuitable for very short link verification.

Compatibility with Fluke OptiFiber Pro

This cord is specified for use with Fluke Networks OptiFiber Pro and DTX-1800 OTDR instruments. Buyers who operate other OTDR brands or models must verify interoperability before purchase.

Highlights

  • Single-mode 9/125 µm fiber for long-distance links
  • 9 ft length suits extended cable runs
  • SC/SC male connectors mate with standard patch panels
  • Compatible with Fluke OptiFiber Pro and DTX-1800 OTDR
  • 90-day limited warranty covers manufacturing defects

Specifications

BrandFLUKE NETWORKS CORE
TypeConsumer Electronics
Shipping weight0.08 kg
Package size305 × 260 × 146 mm

Questions about this item

Should I pick the 9/125 µm single-mode version for my long-distance fiber runs?

The 9/125 µm single-mode cable is designed for extended reach and works with Fluke Networks OptiFiber Pro and DTX-1800 OTDR testers for accurate loss and distance verification.

What does the 524.9 ft length mean when I connect it to my OTDR?

At 524.9 ft this launch fiber exceeds the typical dead-zone requirement for the DTX-1800 OTDR, letting the instrument measure the first connector and the link beyond it.

How do the SC/SC connectors work with the OptiFiber Pro and DTX-1800 OTDR ports?

Both ends use SC male connectors that mate directly to the SC ports on Fluke Networks OptiFiber Pro and DTX-1800 OTDR modules without adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.