We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow Fluke Networks cable verifier with LCD screen and RJ-45 port

FLUKE networks

FLUKE networks MS2-100/WWG 3084165 Cable Verifier

SKU CH-PE2Q-FMEZZ

Verifies copper cables with wiremapping, length, distance-to-fault, PoE detection and service identification on an LCD display

  • TypeElectronic/Bench Testing
  • Verifies copper cables with MicroScanner2 technology
  • Detects PoE and PoE+ power on lines
  • Maps wire pairs and shows cable length
  • Finds distance to fault for quick repairs
  • Identifies active Ethernet service on the link

Cable Verifier for Copper Networks

The Fluke Networks MS2-100/WWG 3084165 verifies copper cabling with wiremapping, length measurement and distance-to-fault readings. An LCD display shows pair tracing results and detects Power over Ethernet plus PoE+ presence. Ethernet service detection and continuity testing confirm link operation for installers and technicians.

Suited for Copper Installers, Not Fibre or Tone Work

This tool fits professionals who certify twisted-pair runs and need PoE verification up to 100 metres. It lacks a tone generator and tone detection, so crews tracing cables through walls need a separate probe. No fibre endpoints, telephone service detection or Wi-Fi analysis are included, limiting use to copper Ethernet environments.

Verifies PoE and PoE+ on Live Links

The single decisive specification is integrated PoE/PoE+ detection while the circuit carries traffic. Technicians can confirm power delivery without extra meters or disconnecting devices. If a job requires only continuity or length, simpler testers exist; this unit is chosen when live power verification is mandatory.

Highlights

  • Verifies copper cables with MicroScanner2 technology
  • Detects PoE and PoE+ power on lines
  • Maps wire pairs and shows cable length
  • Finds distance to fault for quick repairs
  • Identifies active Ethernet service on the link

Specifications

BrandFluke Networks
TypeElectronic/Bench Testing

Questions about this item

Will the MicroScanner2 need periodic recalibration to keep length and fault readings accurate?

Fluke Networks does not publish a factory calibration interval for the MS2-100; the verifier is designed to maintain accuracy without scheduled recalibration under normal use.

What limits how long the MS2-100 can run continuous cable tests before the battery needs recharging?

The unit operates on an internal rechargeable battery; sustained testing is limited by battery capacity rather than thermal throttling.

How much heat or fan noise does the MS2-100 produce when verifying cables all day?

The verifier has no fan and draws low power, so it stays cool and silent during extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.