We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow steel modular crimper with ratchet mechanism and embedded cable cutter stripper

FLUKE networks

FLUKE networks 11212530 modular crimper RJ45 RJ11 RJ12 tester

SKU CH-6XE5-94XZH MPN 11212530

Crimps RJ45, RJ11 and RJ12 modular plugs and includes an embedded flat cable cutter and stripper

  • FeaturesCrimps 8-position RJ45 connectors and 4- and 6- position RJ1
  • Package Contents78408N
  • Crimps RJ45, RJ11 and RJ12 connectors with one tool
  • Embedded cutter and stripper prepare flat cable in a single step
  • Steel frame with ratchet mechanism gives consistent crimp force
  • All-in-one design handles cutting, stripping and crimping tasks
  • Lifetime warranty backs the 11212530 modular crimper

Modular crimper for RJ45, RJ11 and RJ12

The Fluke Networks 11212530 is a steel-bodied hand tool that crimps 8-position RJ45 connectors plus 4- and 6-position RJ11 and RJ12 plugs. A ratchet mechanism controls the cycle for consistent termination, while an embedded cutter and stripper handle flat cable preparation in one device.

Installers terminating Ethernet

Technicians building or repairing Cat5e, Cat6 or voice-grade patch leads will find the three connector sizes covered without swapping dies. The tool does not strip round jacketed cable, so users who need to prepare UTP or STP trunk cable should look at a separate jacket stripper.

Handles daily termination of modular plugs

The ratchet action and hardened dies comfortably manage high-volume patch-cord production and field repairs. The integrated flat-cable stripper is limited to thin ribbon-style wires; it cannot process thicker round network cable, so a dedicated round-cable stripper remains necessary for those jobs.

Highlights

  • Crimps RJ45, RJ11 and RJ12 connectors with one tool
  • Embedded cutter and stripper prepare flat cable in a single step
  • Steel frame with ratchet mechanism gives consistent crimp force
  • All-in-one design handles cutting, stripping and crimping tasks
  • Lifetime warranty backs the 11212530 modular crimper

Specifications

BrandFluke Networks
Model11212530
FeaturesCrimps 8-position RJ45 connectors and 4- and 6- position RJ11 and RJ12 connectors
Embedded flat cable cutter and stripper
Package Contents78408N
Shipping weight0.91 kg
Package size305 × 229 × 102 mm

Questions about this item

What connectors do I need on hand for the Fluke Networks 11212530 to crimp?

The tool crimps 8-position RJ45 and 4- or 6-position RJ11 and RJ12 plugs, so you must supply compatible Western Electric or Stewart Stamping type connectors.

Will the embedded cutter and stripper on the 11212530 handle the round Cat5e cable I already use?

The built-in cutter and stripper are designed for flat cable only; round twisted-pair cable requires a separate stripper.

How can I verify the 11212530 is crimping correctly after I set it up?

Perform a test crimp on each connector type, then inspect every pin for full seating and use a cable tester to confirm continuity across all positions.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.