We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow Fluke pen-style voltage tester with LED tip and pocket clip

Fluke LVD2 Volt Light 90-600V CAT IV 600V Small

SKU CH-6TGM-S53CY

Non-contact AC voltage detector with LED flashlight, dual sensitivity from 90 to 600 V AC, CAT IV 600 V rated, 100000-hour LED life

  • FeaturesFluke - Volt Light (LVD-2), Cat Iv 600 V, Battery Powered, t
  • Height10.43 L x 7.6 W x 1.18 H inches
  • Width10.43 L x 7.6 W x 1.18 H inches
  • Length10.43 L x 7.6 W x 1.18 H inches
  • Weight45.4 grams
  • Sports Team1 Piece
  • Detects voltage from 90 to 600 V AC for safe troubleshooting
  • CAT IV 600 V rating protects you in industrial environments
  • Dual sensitivity shows blue at distance and red at source
  • Ultra-bright LED flashlight lasts 100000 hours for dark panels
  • Weighs 45.4 grams with AAA battery included for all-day carry

Fluke LVD2 Volt Light Tester

The Fluke LVD2 Volt Light is a non-contact AC voltage detector combined with an LED flashlight in a pen-style design. It detects voltage from 90 to 600 V AC and carries a CAT IV 600 V safety rating for commercial and industrial use. The tester features dual sensitivity, glowing blue at a distance and red at the source. A AAA battery is included for immediate operation.

Check Power Source and Environment

Verify that the circuits you intend to test fall within the 90 to 600 V AC detection range. The unit operates between 0°C and 50°C, so confirm the working environment stays within these limits. Ensure the CAT IV 600 V rating matches the installation category of your electrical panels. The device measures 10.43 L x 7.6 W x 1.18 H inches and weighs 45.4 grams for pocket carry.

Suits Electricians Needing Light and Detection

This tool suits electricians and technicians who want a combined voltage detector and flashlight for frontline troubleshooting. The 100,000-hour LED life supports long-term use in dim panels. It is not for users who require contact-based measurements, continuity testing, or current clamping functions. Buyers needing DC voltage detection or voltage readings below 90 V AC should look at other instruments.

Highlights

  • Detects voltage from 90 to 600 V AC for safe troubleshooting
  • CAT IV 600 V rating protects you in industrial environments
  • Dual sensitivity shows blue at distance and red at source
  • Ultra-bright LED flashlight lasts 100000 hours for dark panels
  • Weighs 45.4 grams with AAA battery included for all-day carry

Specifications

BrandFluke
FeaturesFluke - Volt Light (LVD-2), Cat Iv 600 V, Battery Powered, true
Height10.43 L x 7.6 W x 1.18 H inches
Width10.43 L x 7.6 W x 1.18 H inches
Length10.43 L x 7.6 W x 1.18 H inches
Weight45.4 grams
Sports Team1 Piece
TypeVoltmeter

Questions about this item

What comes in the box and is a battery included?

The LVD2 Volt Light ships as a single pen-style unit with one AAA battery already installed so it is ready to use immediately.

How do the blue and red detection ranges differ on this tester?

The tip glows blue when held 2.54 cm to 12.7 cm from an AC source and turns red when placed directly at the source, giving two clear proximity levels.

What does the CAT IV 600 V rating mean for daily use?

It certifies the tester for measurement category IV environments up to 600 V AC, covering service entrances and main panels in commercial and industrial settings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.