We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow Fluke LinkIQ handheld tester with MS-IE remote adapter attached

Fluke

Fluke LinkIQ Cable + Network Tester with MS-IE Remote Adapter

SKU CH-1CXX-V6SKW

Tests industrial Ethernet cables up to 10 Gb/s, verifies PoE up to 90 W, and identifies wiring faults with the included remote adapter

  • Qualifies cabling bandwidth up to 10GBASE-T via frequency-based measurements
  • Identifies nearest switch data rate, name, port and VLAN details
  • Verifies PoE class 1 to 8 with 90W load testing
  • Shows cable length, wire map and distance to faults
  • MS-IE Remote Adapter detects miswired and split pairs on multiple connectors

Industrial Ethernet Cable Tester

The Fluke LinkIQ qualifies copper cabling from 10BASE-T to 10GBASE-T using frequency-based measurements. It supports EtherNet/IP, PROFINET, and EtherCAT protocols for industrial environments. The kit includes the MS-IE Remote Adapter to identify miswired and split pairs on RJ45, M12X, M12D, and M8D terminated cables. It is built for technicians validating industrial network infrastructure.

Pre-Deployment Checks

Verify the cable connectors match the supported RJ45, M12X, M12D, or M8D interfaces before testing. Ensure the remote adapter is correctly paired with the main unit for wire-map and split-pair identification. Confirm the network switch supports the industrial protocols you intend to diagnose, such as EtherNet/IP or PROFINET. Check that PoE classes 1 through 8 are relevant to your powered device requirements.

Thermals Noise Power

The handheld tester operates on battery power during standard cable qualification and network diagnostics. It performs active PoE load tests up to Class 8 (90W) which draws power from the connected switch port. The unit produces no audible fan noise during normal operation. Typical use involves brief measurement cycles rather than continuous high-draw activity.

Highlights

  • Qualifies cabling bandwidth up to 10GBASE-T via frequency-based measurements
  • Identifies nearest switch data rate, name, port and VLAN details
  • Verifies PoE class 1 to 8 with 90W load testing
  • Shows cable length, wire map and distance to faults
  • MS-IE Remote Adapter detects miswired and split pairs on multiple connectors

Specifications

No published specifications for this item yet.

Questions about this item

What cables and connectors does the MS-IE Remote Adapter let me test?

The MS-IE Remote Adapter identifies miswired and split pairs on RJ45, M12X, M12D, and M8D terminated cables.

Which cable bandwidths can the LinkIQ qualify?

It qualifies cabling bandwidth from 10BASE-T to 10GBASE-T, covering 10 Mb/s up to 10 Gb/s.

What PoE classes and maximum power does the load test verify?

It detects PoE class 1 through 8 and performs a load test up to 90 W.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.